P/N + Описание + Поиск контента

Description
The KAI−0340 image sensor is a 640 (H) × 480 (V) resolution, 1/3″ optical format, progressive scan interline CCD. This image sensor is offered in 2 versions: the KAI−0340−Dual supports 210 full resolution frame-per-second readout while the KAI−0340−Single supports 110 frame-per-second readout. Frame rates as high as 2,000 Hz (KAI−0340−Single) and 3,400 Hz (KAI−0340−Dual) can be achieved by combining the Fast Horizontal Line Dump with custom clocking modes. Designed for demanding imaging applications, the KAI−0340 provides electronic shuttering, peak QE (quantum efficiency) of 55%, extremely low noise and low dark current. These features give this sensor exceptional sensitivity and make it ideal for machine vision, scientific, surveillance, and other computer Input applications.

Features
• High Sensitivity
• High Dynamic Range
• Low Noise Architecture
• High Frame Rate
• Electronic Shutter

Applications
• Intelligent Transportation Systems
• Machine Vision
• Scientific

Description
The KAI−0340 image sensor is a 640 (H) × 480 (V) resolution, 1/3″ optical format, progressive scan interline CCD. This image sensor is offered in 2 versions: the KAI−0340−Dual supports 210 full resolution frame-per-second readout while the KAI−0340−Single supports 110 frame-per-second readout. Frame rates as high as 2,000 Hz (KAI−0340−Single) and 3,400 Hz (KAI−0340−Dual) can be achieved by combining the Fast Horizontal Line Dump with custom clocking modes. Designed for demanding imaging applications, the KAI−0340 provides electronic shuttering, peak QE (quantum efficiency) of 55%, extremely low noise and low dark current. These features give this sensor exceptional sensitivity and make it ideal for machine vision, scientific, surveillance, and other computer Input applications.

Features
• High Sensitivity
• High Dynamic Range
• Low Noise Architecture
• High Frame Rate
• Electronic Shutter

Applications
• Intelligent Transportation Systems
• Machine Vision
• Scientific

3W - Dual/Single Output - Ultra Wide Input - Isolated & Regulated DC-DC Converter

The 3DAW series are specially designed for applications where a Wide range Input voltage power supplies are Isolated from the Input power supply in a distributed power supply system on a circuit board.

These products apply to:
1) Where the voltage of the Input power supply is Wide range
   (voltage range ≤ 2:1);
2) Where isolation is necessary between Input and Output
   (isolation ≤2000VDC);
3) Where the regulation of the Output voltage and the Output ripple
   noise are demanded.

3W - Dual/Single Output - Ultra Wide Input - Isolated & Regulated DC-DC Converter

The 3DAW4_ T° series are specially designed for applications where a Wide range Input voltage power supplies are Isolated from the Input power supply in a distributed power supply system on a circuit board.

These products apply to:
1) Where the voltage of the Input power supply is Wide range
   (voltage range≤ 4:1);
2) Where isolation is necessary between Input and Output
   (isolation ≤1000VDC, ≤2000VDC, ≤4000VDC, ≤6000VDC);
3) Where the regulation of the Output voltage and the Output ripple
   noise are demanded.

3W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter

The 3DAW_3 series are Isolated 3W DC-DC products with 2:1 Input voltage and conventional voltage Output. The product has a relatively compact DIP package and features high efficiency, operating temperature of -40°C ~+85°C, remote control and continuous short-circuit protection.
The smaller size and fine cost design make the converter an ideal solution in communication, instruments, and industrial electronics applications.

● Wide 2:1 Input voltage range
● High efficiency up to 86%
● Isolation voltage 3kVDC
● Short circuit protection (SCP)
● Operating Temperature
   Range: -40°C to +85°C
● EN60950 approval

DC-DC Converter 3 Watt

The 3DAW series are specially designed for applications where a Wide range Input voltage power supplies are Isolated from the Input power supply in a distributed power supply system on a circuit board.

These products apply to:
1) Where the voltage of the Input power supply is Wide range
   (voltage range ≤2:1)
2) Where isolation is necessary between Input and Output
   (isolation voltage ≤1500VDC)
3) Where the regulation of the Output voltage and the Output ripple
   noise are demanded

DESCRIPTION
The NDT series is a range of low profile DCDC converters offering dual Outputs over a 2:1 Input voltage range. All parts deliver 3W Output power up to 85°C without heatsinking. A flyback oscillator design with Isolated feedback is used to give regulation over the full operating range of 25% to 100% of full load. It is strongly recommended that external capacitors be used on Input and Output to guarantee performance over full load and Input voltage range (see application notes for guidance). The plastic case is rated to UL 94V-0 and encapsulant to UL 94V-1and the connection pins are formed from a tin plated alloy 42 leadframe.

FEATURES
■ Industry Standard Footprint
■ 1kVDC Isolation
■ Dual Isolated Output
■ Short Circuit Protection
■ Low Profile 24 Pin Case
■ Efficiency to 81%
■ Power Density 0.90W/cm3
■ 2:1 Wide Input Range
■ 24V & 48V Input
■ 12V & 15V Output
■ Footprint 4.73cm2
■ UL 94V-0 Package Materials
■ Operating Temperature Range –40°C to 85°C
■ Load and Line Regulation <1% on Both Outputs
■ No Heatsink Required
■ Internal SMD Construction
■ Fully Encapsulated
■ Custom Solutions Available

DESCRIPTION
The NDT series is a range of low profile DCDC converters offering dual Outputs over a 2:1 Input voltage range. All parts deliver 3W Output power up to 85°C without heatsinking. A flyback oscillator design with Isolated feedback is used to give regulation over the full operating range of 25% to 100% of full load. It is strongly recommended that external capacitors be used on Input and Output to guarantee performance over full load and Input voltage range (see application notes for guidance). The plastic case is rated to UL 94V-0 and encapsulant to UL 94V-1and the connection pins are formed from a tin plated alloy 42 leadframe.

FEATURES
■ Industry Standard Footprint
■ 1kVDC Isolation
■ Dual Isolated Output
■ Short Circuit Protection
■ Low Profile 24 Pin Case
■ Efficiency to 81%
■ Power Density 0.90W/cm3
■ 2:1 Wide Input Range
■ 24V & 48V Input
■ 12V & 15V Output
■ Footprint 4.73cm2
■ UL 94V-0 Package Materials
■ Operating Temperature Range –40°C to 85°C
■ Load and Line Regulation <1% on Both Outputs
■ No Heatsink Required
■ Internal SMD Construction
■ Fully Encapsulated
■ Custom Solutions Available

[CD-Technologies]

DESCRIPTION
The NDT series is a range of low profile DCDC converters offering dual Outputs over a 2:1 Input voltage range. All parts deliver 3W Output power up to 85°C without heatsinking. A flyback oscillator design with Isolated feedback is used to give regulation over the full operating range of 25% to 100% of full load. It is strongly recommended that external capacitors be used on Input and Output to guarantee performance over full load and Input voltage range (see application notes for guidance). The plastic case is rated to UL 94V-0 and encapsulant to UL 94V-1and the connection pins are formed from a tin plated alloy 42 leadframe.

FEATURES
■ Industry Standard Footprint
■ 1kVDC Isolation
■ Dual Isolated Output
■ Short Circuit Protection
■ Low Profile 24 Pin Case
■ Efficiency to 81%
■ Power Density 0.90W/cm3
■ 2:1 Wide Input Range
■ 24V & 48V Input
■ 12V & 15V Output
■ Footprint 4.73cm2
■ UL 94V-0 Package Materials
■ Operating Temperature Range –40°C to 85°C
■ Load and Line Regulation <1% on Both Outputs
■ No Heatsink Required
■ Internal SMD Construction
■ Fully Encapsulated
■ Custom Solutions Available

[muRata-Ps]

DESCRIPTION
The NDTD series is a range of low profile DC/DC converters offering dual Outputs over a 2:1 Input voltage range. All parts deliver 3W Output power up to 85ºC without heatsinking. A flyback oscillator design with Isolated feedback is used to give regulation over the full operating range of 25% to 100% of full load. It is strongly recommended that external capacitors be used on Input and Output to guarantee performance over full load and Input voltage range (see application notes for guidance). The plastic case is rated to UL94V-0 and encapsulant to UL94V-1 and the connection pins are formed from a tin plated alloy 42 leadframe.

FEATURES
■ RoHS compliant
■ Industry standard footprint
■ Power density 0.90W/cm3
■ 2:1 Input range, 3W Output power, minimum 3:1 Input range with power derating to 2W
■ Dual Isolated Output
■ Short circuit protection
■ Operating temperature range -40ºC to 85ºC
■ Load and line regulation <1% on both Outputs
■ No heatsink required
■ 1kVDC isolation
■ 5V, 12V, 24V & 48V Input
■ 3.3V, 5V, 12V & 15V Output
■ Internal SMD construction
■ Fully encapsulated