GRM219B31H105KA73 Просмотр технического описания (PDF) - Murata Manufacturing

Номер в каталоге

Компоненты Описание

Список матч

GRM219B31H105KA73

Chip Multilayer Ceramic Capacitors for General Purpose

Murata Manufacturing 

5.Washing

Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken solder joints. Before starting your production process,

test your cleaning equipment / process to insur eit does not degrade the capacitors.

6.Electrical Test on Printed Circuit Board

1. Confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board.

　1-1. Avoid bending the printed circuit board by the pressure of a test-probe, etc.

The thrusting force of the test probe can flex the PCB, resulting in cracked chips or open solder joints.

Provide support pins on the back side of the PCB to prevent warping or flexing.

Install support pins as close to the test-probe as possible.

1-2. Avoid vibration of the board by shock when a test -probe contacts a printed circuit board.

[Not Recommended]

[Recommended]

Peeling

Support Pin

Test-probe

Test-probe

GRM219B31H105KA73-01A

Share Link: