MB88154A Просмотр технического описания (PDF) - Cypress Semiconductor

Номер в каталоге

Компоненты Описание

Список матч

MB88154A

Spread Spectrum Clock Generator

Cypress Semiconductor 

MB88154A

16. Lock-up Time

VDD

3.0 V

Internal clock

stabilization wait time

XIN

Setting pin VIH

SEL0,

SEL1

CKOUT

tLK

(lock-up time )

If the setting pin is fixed at the “H” or “L” level, the maximum time after the power is turned on until the set clock signal is output from

CKOUT pin is (the stabilization wait time of input clock to XIN pin) + (the lock-up time “tLK”). For the input clock stabilization time,

check the characteristics of the resonator or oscillator used.

Note : When the pin setting is changed, the CKOUT pin output clock stabilization time is required. Until the output clock signal

becomes stable, the output frequency, output clock duty cycle, modulation period, and cycle-cycle jitter cannot be guaranteed.

It is therefore advisable to perform processing such as cancelling a reset of the device at the succeeding stage after

the lock-up time.

Document Number: 002-08252 Rev. *B

Page 16 of 23

Share Link: