MAX1618EVKIT Просмотр технического описания (PDF) - Maxim Integrated

Номер в каталоге

Компоненты Описание

Список матч

MAX1618EVKIT

MAX1618 Evaluation System/Evaluation Kit

Maxim Integrated 

MAX1618 Evaluation System/Evaluation Kit

Table 1. JU1 and JU2 Shunt Settings for

SMBus Address

SHUNT LOCATION

JU1

JU2

2–3

2–3

2–3

Open

2–3

1–2

Open

2–3

Open

Open

Open

1–2

1–2

2–3

1–2

Open

1–2

1–2

MAX1618

ADDRESS

0011 000

0011 001

0011 010

0101 001

0101 010

0101 011

1001 100

1001 101

1001 110

Table 2. JU3 Shunt Settings for STBY

SHUNT LOCATION

STBY PIN

FUNCTION

1–2

Connected to GND In standby mode

Connect an exter-

Open

nal signal to STBY

––

2–3

Connected to VCC In operating mode

Jumper and Switch Settings

Two jumpers set the MAX1618 slave address. The

default address is 1001 110 (ADD0 = ADD1 = VCC).

JU1 corresponds to ADD0 and JU2 corresponds to

ADD1; see Table 1 for a complete list of addresses.

The MAX1618 must undergo a power-on reset for the

new address to become effective.

The +5V supply voltage for the MAX1618 comes from

the SMBus interface board. To evaluate the MAX1618

with a different voltage, cut the trace shorting the two

pins of JU4 and apply a voltage to the pad labeled

VCC.

The MAX1618 can be placed in standby mode using

jumper JU3. See Table 2 for jumper settings.

A slide switch, SW1, is provided as a means to force a

power-on reset of the MAX1618. This switch disables

power to the device.

4 _______________________________________________________________________________________

Share Link: