PE500C-10F Просмотр технического описания (PDF) - PerkinElmer Inc
Номер в каталоге
Компоненты Описание
Список матч
PE500C-10F Datasheet PDF : 2 Pages
| |||
PE500C-10F and PE500C-10UV
Operational Specifications
Description
Nominal
Range
Power
500 watts
350-525 watts
Current
32 amps (DC)
23-35 amps (DC)
Operating Voltage
15.5 volts (DC)
14-16,5 volts (DC)
Ignition Voltage
30 kilovolts (recommended minimum)
Temperature
150º C (maximum)
Lifetime*
1000 hours (500 hour warranty)
* End of lamp life is defined as 50% of initial output.
Output at Nominal Power
F= UV Filtered Output/ UV = UV Enhanced Output
Description
PE500C-10F
Radiant Output*
112 watts
UV Output*
5 watts
IR Output*
65 watts
Visible Output*
10500 Lumens
Color Temperature
5900 Kelvin
Peak Instabilities
4%
Spot Size at Crossover .07” at 50% pts
Spot Size at Crossover .21” at 10% pts
PE500C-10UV
112 watts
10.3 watts
63 watts
9550 Lumens
5050 Kelvin
4%
0.7” at 50% pts
.21” at 10% pts
*These values indicate total output in all directions.
Wavelengths = UV<390nm, IR>770nm, Visible 390nm to 770nm.
** Beam Geometry defined as half angle at 10% PTS after 01/100/1000 hours.
Dimensions
1.00 (25.4)
1.298 (32.97)
1.67 (42.4)
.241
(6.12)
.259 (6.58)
.75
(19.05)
1.00
(25.4)
Physical Specifications
Description
Arc Gap
Reflector Geometry
Weight
Window Diameter
Specification
.045 inch (1.14mm)
Ellipsoidal 1= X2/M2 +Y2/N2
191 grams
1 inch (25.4 mm)
Focused Output
Description
Visible Output*
6mm aperture
7770 Lumens
3mm aperture
4085 Lumens
* Nominal values at 500 watts after 2 hour burn-in
Total Output
75 watts
39 watts
Notes
1. Lamp must not be operated with window facing upwards within
45º of vertical.
2. Seal temperature must not exceed 150º C.
3. Current/power regulated power supplies and PerkinElmer lamp
housing units are recommended.
4. Lamp must be operated within recommended current and power
range. Over powering may lead to arc instability, hard starting
and premature aging.
5. CERMAX lamps are much safer lamps to use than their quartz
xenon arc lamp equivalents. However, caution must be practiced
when operating lamps because they are under high pressure,
require high voltage, reach temperatures up to 200º C, and their
IR and UV radiation can cause skin burns and eye damage.
Read hazard sheet included with each lamp shipment.
Spectral Output
F
UV
F + HOT MIRROR
100
80
.25 (6.35)
.645 (16.4)
.40 (10.2)
.035 (.89)
2.17 (55.1)
1.750 (44.45)
60
.752 (19.1)
M=1.2136
.008 (.203)
N=0.712
40
.231 (5.87)
20
Focal Point
Cathode
Refector Edge
CL Ellipse
Dimensions in parentheses are in millimeters
0
200
300 400 500
600 700
800
900 1000 1100
WAVELENGTH (NM)
PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and the feasibility of
designing a lamp specifically suited to your needs.
For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto.
All values are nominal; specifications subject to change without notice.
USA:
Europe:
Asia:
PerkinElmer Optoelectronics
PerkinElmer Optoelectronics
PerkinElmer Optoelectronics
44370 Christy St.
GmbH
47 Ayer Rajah Crescent #06-12
Fremont, CA 94538
Wenzel-Jaksch-Str. 31
Singapore 139947
Phone: (510) 979-6500
65199 Wiesbaden
Phone: +65 775 2022
Fax: (510) 687-1140
Germany
Fax: +65 775 1008
.
Toll Free: (800) 775-6786
Phone: +49 611 492 0
Fax: +49 611 492 369
© 2000 PerkinElmer inc. All rights reserved.
DS-168 Rev C 1101
www.perkinelmer.com/opto
Share Link: 