MI-AIM Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

Список матч

MI-AIM

AC Input Front End Module

Unspecified 

MI-AIM™

Specifications (Cont.)

PRODUCT GRADE SPECIFICATIONS

Parameter

I-Grade

Storage temperature

-55°C to +125°C

Operating temperature (baseplate)

-40°C to +100°C

Power cycling burn-in

12 hours, 29 cycles

Temperature cycled with power off

17°C per minute rate of change

12 cycles

-65°C to +100°C

Test data supplied at these temperatures [a]

-40°C, +80°C

Warranty

2 years

Environmental compliance

MIL-STD-810

Derating

NAVMAT P-4855-1A

[a] Test data available for review or download from vicorpower.com

M-Grade

-65°C to +125°C

-55°C to +100°C

96 hours, 213 cycles

12 cycles

-65°C to +100°C

-55°C, +80°C

2 years

MIL-STD-810

NAVMAT P-4855-1A

ENVIRONMENTAL QUALIFICATIONS

Parameter

Altitude

Explosive Atmosphere

Vibration

Shock

Acceleration

Humidity

Solder Test

Fungus

Salt-Fog

Qualification

MIL-STD-810D, Method 500.2, Procedure III, explosive decompression (40K ft.).

MIL-STD-810D, Method 500.2, Procedure II, 40,000ft., 1000 – 1500ft./ min. to 70,000ft., unit functioning

MIL-STD-810C, Method 511.1, Procedure I

MIL-STD-810D, Method 514.3, Procedure I, category 6, helicopter, 20g

MIL-STD-810D, Method 514.3 random: 10 – 300Hz @ 0.02g2/Hz, 2000Hz @ 0.002g2/ Hz, 3.9 total Grms

3h­rs/axis. Sine: 30Hz @ 20g, 60Hz @ 10g, 90Hz @ 6.6g, 120Hz @ 5.0g, 16.0 total Grms, 3 axes

MIL-STD-810E, Method 514.4, Table 514.4-VII, ±6db/octave, 7.7Grms, 1hr/axis

MIL-STD-810D, Method 516.3, Procedure I, functional shock, 40g

MIL-STD-202F, Method 213B, 18 pulses, 60g, 9msec

MIL-STD-202F, Method 213B, 75g, 11ms saw tooth shock

MIL-STD-202F, Method 207A, 3 impacts / axis, 1, 3, 5 feet

MIL-STD-810D, Method 513.3, Procedure II Operational test, 9g for 1 minute along 3 mutually perpendicular axes

MIL-STD-810D, Method 507.2, Procedure I, cycle I, 240hrs, 88% relative humidity

MIL-STD-202, Method 208, 8hr. aging

MIL-STD-810C, Method 508.1

MIL-STD-810C, Method 509.1

Storage

Vicor products, when not installed in customer units, should be stored in ESD safe packaging in accordance with ANSI/ESD S20.20,

“Protection of Electrical and Electronic Parts, Assemblies and Equipment” and should be maintained in a temperature controlled factory/

warehouse environment not exposed to outside elements controlled between the temperature ranges of 15°C and 38°C. Humidity shall not

be condensing, no minimum humidity when stored in an ESD compliant package.

MI-AIM™

Page 3 of 5

Rev 1.6

06/2017

vicorpower.com

800 927.9474

Share Link: