HMC928LP5E Просмотр технического описания (PDF) - Hittite Microwave
Номер в каталоге
Компоненты Описание
Список матч
HMC928LP5E Datasheet PDF : 6 Pages
| |||
v03.1211
Outline Drawing
HMC928LP5E
450° Analog Phase Shifter,
2 - 4 GHz
13
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Package Information
Part Number
Package Body Material
Lead Finish
HMC928LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 [2]
Package Marking [1]
H928
XXXX
Pin Descriptions
Pin Number
1 - 5, 8 - 13,
15 - 17, 20 - 32
Function
N/C
6
RFIN
7, 8
GND
Description
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
Port is DC blocked.
Ground: Backside of package has exposed metal ground slug that
must be connected to ground thru a short path. Vias under the device
are required.
Phase shift control pin. Application of a voltage between 0 and 13
14
Vctl
volts causes the transmission phase to change. The DC equivalent
circuit is a series connected diode and resistor.
19
RFOUT
Port is DC blocked.
Interface Schematic
13 - 5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Share Link: 