RT5047A Просмотр технического описания (PDF) - Richtek Technology

Номер в каталоге

Компоненты Описание

Список матч

RT5047A

Single Output LNB Supply and Control Voltage Regulator

Richtek Technology 

Operation

The RT5047A integrates a current mode boost

converter and linear regulator. Use the SEL pin to

control the LNB voltage and the boost converter track is

at least greater 850mV than LNB voltage. The boost

converter is the high efficiency PWM architecture with

700kHz operation frequency. The linear regulator has

the capability to source current up to 550mA during

continuous operation. All the loop compensation,

current sensing, and slope compensation functions are

provided internally.

OCP

Both the boost converter and the linear regulator have

independent current limit. In the boost converter

(OCP1), this is achieved through cycle-by-cycle

internal current limit (typ. 3A). In the linear regulator

(OCP2), when the linear regulator exceeds OCP more

than 48ms, the LNB output will be disabled and re-start

after 1.8s.

RT5047A

Tone Circuit

This circuit is used for tone generation. Use the TONE

pin to control output amplitude of LNB.

OTP

When the junction temperature reaches the critical

temperature (typically 150C), the boost converter and

the linear regulator are immediately disabled.

UVLO

The UVLO circuit compares the VIN with the UVLO

threshold (7.7V rising typically) to ensure that the input

voltage is high enough for reliable operation. The

350mV (typ.) hysteresis prevents supply transients

from causing a shutdown.

PWM Controller

The loop compensation, current sensing, and slope

compensation functions are provided internally.

Copyright © 2015 Richtek Technology Corporation. All rights reserved.

DS5047A-00 March 2015

is a registered trademark of Richtek Technology Corporation.

www.richtek.com

3

Share Link: