ADIS16136AMLZ(RevD) Просмотр технического описания (PDF) - Analog Devices
Номер в каталоге
Компоненты Описание
производитель
ADIS16136AMLZ Datasheet PDF : 20 Pages
| |||
Data Sheet
±450°/Sec Precision Angular Rate Sensor
ADIS16136
FEATURES
Digital gyroscope system, ±450°/sec measurement range
In-run bias stability, 4°/hour
Autonomous operation and data collection
No external configuration commands required
Start-up time: 180 ms; sleep mode recovery: 2.5 ms
Factory calibrated sensitivity and bias
Calibration temperature range: −40°C to +70°C
SPI-compatible serial interface
Wide bandwidth: 380 Hz
Embedded temperature sensor
Programmable operation and control
Automatic and manual bias correction controls
Digital filters: Bartlett FIR, average/decimation
Internal sample rate: up to 2048 SPS
Digital I/O: data ready, alarm indicator, general-purpose
Alarms for condition monitoring
Sleep mode for power management
Enable input sync operation
Single-supply operation: 4.75 V to 5.25 V
2000 g shock survivability
Operating temperature range: −40°C to +85°C
APPLICATIONS
Precision instrumentation
Platform stabilization and control
Industrial vehicle navigation
Downhole instrumentation
Robotics
GENERAL DESCRIPTION
The ADIS16136 iSensor® is a high performance, digital gyroscope
sensing system that operates autonomously and requires no
user configuration to produce accurate rate sensing data. It
provides performance advantages with its low noise density,
wide bandwidth, and excellent in-run bias stability, which enable
applications such as platform control, navigation, robotics, and
medical instrumentation.
This sensor system combines industry leading iMEMS® technology
with signal conditioning that optimizes dynamic performance. The
factory calibration characterizes the entire sensor signal chain for
sensitivity and bias over a temperature range of −40°C to +70°C. As
a result, each ADIS16136 has its own unique correction formulas
to produce accurate measurements upon installation. For some
systems, the factory calibration eliminates the need for system
level calibration and greatly simplifies it for others.
The ADIS16136 provides data at rates of up to 2048 SPS and
offers an averaging/decimation filter structure for optimizing
noise/bandwidth trade-offs. The serial peripheral interface (SPI)
and user register structure provide easy access to configuration
controls and calibrated sensor data for embedded processor
platforms.
The 36 mm × 44 mm × 14 mm package provides four holes for
simple mechanical attachment, using M2 (or 2-56 standard size)
machine screws along with a standard 24-pin, dual row, 1 mm
pitch connector that supports electrical attachment to a printed
circuit board (PCB) or cable system.
FUNCTIONAL BLOCK DIAGRAM
DIO1 DIO2 DIO3 DIO4/CLKIN RST
VDD
SELF-TEST
I/O
ALARMS
POWER
MANAGEMENT
GND
MEMS
SENSOR
TEMP
SENSOR
CLOCK
ADIS16136
CONTROLLER
CALIBRATION
FILTER
USER
CONTROL
REGISTERS
OUTPUT
DATA
REGISTERS
SPI
PORT
CS
SCLK
DIN
DOUT
Figure 1.
Rev. D
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: 