TC7MP245FTG Просмотр технического описания (PDF) - Toshiba

Номер в каталоге

Компоненты Описание

Список матч

TC7MP245FTG

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

Toshiba 

Absolute Maximum Ratings (Note 1)

TC7MP245FK/FTG

Parameter

Symbol

Rating

Unit

Power supply voltage

Vcc

-0.5 to 4.6

V

DC input voltage (DIR,OE)

VIN

-0.5 to 4.6

V

DC input/output voltage(A bus)

VI/OA

-0.5 to 4.6 (Note 2)

V

-0.5 to Vcc+0.5 (Note 3)

DC input/output voltage(B bus)

VI/OB

-0.5 to Vcc+0.5

V

Input diode current(DIR,OE)

IIIK

-50

mA

Input/Output diode current

II/OK

±50

mA

Output current

IOUT

±50

mA

DC VCC/ground current

ICC/IGND

±100

mA

Power dissipation

PD

180

mW

Storage temperature

Tstg

-65 to 150

℃

Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance

or even destruction.

Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and

the significant change in temperature, etc.) may cause this product to decrease in the reliability

significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are

within the absolute maximum ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability

Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e.

reliability test report and estimated failure rate, etc).

Note 2: VCC=0V, or output off state.

Note 3: OE=”L”, DIR=”L”

Operating Ranges (Note 1)

Parameter

Symbol

Rating

Unit

Power supply voltage

1.65 to 3.6

Vcc

V

1.2 to 3.6 (Note 2)

DC input voltage (DIR,OE)

VIN

-0.3 to 3.6

V

DC input/output voltage(A bus)

VI/OA

0 to 3.6 (Note 3)

V

0 to Vcc (Note 4)

DC input/output voltage(B bus)

VI/OB

0 to Vcc

V

Output current (A bus)

IOHA/IOLA

±12 (Note 5)

±9 (Note 6)

mA

±2 (Note 7)

Output current(B bus)

IOHB/IOLB

±24 (Note 5)

±18 (Note 6)

mA

±4 (Note 7)

Operating temperature

Topr

-40 to 85

℃

Input rise and fall time

dt/dv

0 to 10 (Note 8)

ns/V

Note 1:

Note 2:

Note 3:

Note 4:

Note 5:

Note 6:

Note 7:

Note 8:

The operating ranges must be maintained to ensure the normal operation of the device. Unused

inputs and bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus

outputs with VCC or GND when the I/O of the bus terminal changes by the function. In this case,

please note that the output is not short-circuited.

Data retention only

VCC=0V, or output off state

OE=”L”, DIR=”L”

VCC=3.0 to 3.6V

VCC=2.3 to 2.7V

VCC=1.65 to 1.95V

VIN=0.8 to 2.0V, VCC=3.0V

3

2007-10-19

Share Link: