MAL212380479 Просмотр технического описания (PDF) - Vishay Semiconductors
Номер в каталоге
Компоненты Описание
Список матч
MAL212380479 Datasheet PDF : 13 Pages
| |||
End of Life. Last Available Purchase Date is 30-December-2015
www.vishay.com
123 SAL-A
Vishay BCcomponents
ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG
2281 123 8.... Form BA ± 10 %, level S, lead (Pb)-free
2222 123 8.... Form BA ± 10 %, level S, non lead (Pb)-free
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
REQUIREMENTS
Severe vibration tests in accordance with “IEC 60068-2-6” and “MIL STD-202”, method 204, letter E, with the following details and
additions
Method of mounting:
Clamping both body and leads
Severity 1
Frequency range temperature 10 Hz to 3000 Hz;
20 °C to 25 °C
Severity 2
Severity 1 and 2
Direction and duration of motion:
Severity 1
Severity 2
Functioning:
Frequency range temperature 50 Hz to 2000 Hz; 125 °C
vibration amplitude: 50 g or 3.5 mm, whichever is less
1 octave/min; 3 directions (mutually perpendicular);
20 sweeps per direction (total 60 sweeps or 18 h)
1 octave/min; 2 directions (longitudinal and transversal);
3 sweeps per direction (total 6 sweeps or 1 h)
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Severity 1
Rated voltage applied
Severity 2
No voltage applied
Typical capability
> 80 g at 10 Hz to 3000 Hz (also at 125 °C)
Severe shock tests in accordance with “IEC 60068-2-27” and “MIL STD-202”, method 213, letter F, with the following details and
additions
Method of mounting
Clamping both body and leads
Pulse shape:
Severity 1
Severity 2
Severity 3
Direction and number of shocks:
Severity 1 and 2
Severity 3
Half-sine or sawtooth
1500 g; 0.5 ms (“MIL STD-202”, method 213, letter F)
3000 g; 0.2 ms
10 000 g; 0.1 ms
3 successive shocks in each direction of 3 mutually
perpendicular axes (total 18 shocks)
1 shock in any direction
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Functioning
Rated voltage applied
Revision: 14-Aug-15
11
Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 