SF10050G Просмотр технического описания (PDF) - 3M

Номер в каталоге

Компоненты Описание

Список матч

SF10050G

Scotch-Weld™ Cyanoacrylate

3M 

Scotch-Weld Cyanoacrylate Adhesive SF100

February 2010

Additional Product

Information

Application

Techniques

Storage Conditions

Shelf Life

Scotch-Weld Activators AC11 and AC12 may be used in conjunction with Scotch-

Weld cyanoacrylates where cure speed needs to be accelerated. Cure speeds of

less than 2 seconds can be obtained with most Scotch-Weld cyanoacrylates. The

use of an activator can reduce the final bond strength by up to 30%.

Bond speed is very fast so ensure that parts are properly aligned before bonding.

Scotch-Weld Activators may be required if there are gaps or porous surfaces.

Some plastics may require application of Scotch-Weld AC77 Primer. Ensure

parts are clean, dry and free from oil and grease. Product is normally hand

applied from the bottle. Apply sparingly to one surface and press parts firmly

together until handling strength is achieved. As a general rule, as little

cyanoacrylate as possible should be used – over application will result in slow cure

speed and lower bond strength.

Keep the adhesive in a cool, dry place away from direct sunlight. Under such

conditions shelf life at room temperature will be 12 months.

Refrigeration to 5◦C gives optimum storage stability.

12 months from date of despatch by 3M when stored in the original carton at 21°C

Precautionary

Information

For Additional

Information

Refer to product label and material Safety Data Sheet for health and safety

information before using the product. For information please contact your local 3M

Office. www.3M.com

To request additional information or to arrange for sales assistance, call 0870

6080050 Address correspondence to: 3M United Kingdom PLC, 3M House, 28

Great Jackson Street, Manchester, M15 4PA

Important Notice

All statements, technical information and recommendations contained in this

document are based upon tests or experience that 3M believes are reliable.

However, many factors beyond 3M’s control can affect the use and performance of

a 3M product in a particular application, including the conditions under which the

product is used and the time and environmental conditions in which the product is

expected to perform. Since these factors are uniquely within the user’s knowledge

and control, it is essential that the user evaluate the 3M product to determine

whether it is fit for a particular purpose and suitable the user’s method or

application.

All questions of liability relating to this product are governed by the terms of the

sale subject, where applicable, to the prevailing law

Values presented have been determined by standard test methods and are average values not to be used for specification

purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that

you conduct your own tests to determine their suitability for your applications.

This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result

of our recommendations

3M and Scotch-Weld are trademarks of the 3M Company.

3M United Kingdom PLC

3M House,

28 Great Jackson Street,

Manchester,

M15 4PA

Product Information :

Tel 0870 60 800 50

Fax 0870 60 700 99

3M Ireland Limited

The Iveagh Building

The Park, Carrickmines

Dublin 18,

Ireland

Customer Service :

Tel (01) 280 3555

Fax (01) 280 3509

Share Link: