ML4813CP Просмотр технического описания (PDF) - Micro Linear Corporation

Номер в каталоге

Компоненты Описание

производитель

ML4813CP

Flyback Power Factor Controller

Micro Linear Corporation 

APPLICATIONS (Continued)

INDUCTOR INFORMATION

L3 is the flyback inductor and also provides the operating

power for the control circuitry. A gapped ferrite pot core

was chosen for this application for it's modest high

frequency losses with high ripple current operation. Some

possible choices are:

Manufadurer Part #

Total Gap

NP

Magnetics Inc. F43019

0.05"

32

Phillips

3019 PL00-3F3 0.05"

32

Phillips

3019 PA125-3C8 0.07"

38

The first 2 cores are sold ungapped and require the use of

a .025. spacer to gap the center leg to yield a total gap

length of 0.05". If an ungapped core is used, a "shorted

turn" should be employed as shown in Figure 14 to

prevent radiated EMI. The third core listed is sold with its

center ieg pre-gapped (0.07" total) so that the outside of

the core closes completely, providing shielding without a

shorted turn. NS should be 3 turns. All windings are

#24AWG wire.

Inductors L1 and L2 are constructed using a powdered

iron. This is a suitable material for these inductors since

the high frequency ripple currents (and resulting flux

excursions) are much less severe than for L3. The core

selected is a MicroMetals T68-26D with 80 turns or

#24AWG wire.

ML4813

SHORTED TURN

(COPPER FOIL)

0.25" SPACER

WINDINGS

Figure 14. EMI Shielding for Ungapped Cores

13

Share Link: