XE5692H Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

Список матч

XE5692H

Half-Size, Low-Cost Global Embedded Modem

Unspecified 

FCC Instructions

The XE5692H complies with Part 68 of the FCC Rules and Regulations. With each device shipped, there

is a label which contains the FCC Registration Number. The FCC Registration number incorporates the

Model Number, Manufacturer Identifier, Product Type identifier and Ringer Equivalence Number (REN)

for this product. You must, upon request, provide this information to your telephone company. the format

of the FCC Registration Number is shown below.

TBD

The mounting of this device in the final assembly must be made in such a manner as to preserve the high

voltage protection between the TIP/RING Connection and the rest of the system. Typically, this may be

accomplished by maintaining a minimum spacing 100 mils between the TIP/RING Traces to the RJ-11C

Jack and low voltage portion of the system. No additional circuitry may be attached between TIP/RING

and the telephone line connection, unless specifically allowed in the rules.

The REN is useful to determine the quantity of devices you may connect to a telephone line and still have

all of these devices ring when the number is called. In most, but not all areas, the sum of the RENs of all

devices connected to one line should not exceed five (5.0). To be certain of the number of devices you

may connect to the line, as determined by the REN, you should contact the local telephone company to

determine the maximum REN for you calling area.

If your system causes harm to the telephone network, the telephone company may discontinue service

temporarily. If possible, they will notify you in advance. If advance notification is not practical, you will be

notified as soon as possible.

Your telephone company may make changes in its facilities, equipment, operations or procedures that

could affect proper functioning of your equipment. If they do, you will be notified in advance to give you

an opportunity to maintain uninterrupted telephone service.

If you experience trouble with this device, please contact XECOM at (408) 945-6640 for information on

obtaining service or repairs. The telephone company may ask you to disconnect this device from the

network until the problem has been corrected or until you are sure that the device is not malfunctioning.

XECOM

(21)

XE5692H

Share Link: