XE5690SM-1 Просмотр технического описания (PDF) - Xecom

Номер в каталоге

Компоненты Описание

Список матч

XE5690SM-1

Compact, Low-Cost Global Embedded Modem

Xecom 

XE5690SM REGISTER SETTINGS

S6 Dial Tone Wait Time: S6 determines how

long the modem waits for dial tone before

dialing. The Dial Tone Wait Time cannot

be set to less than two seconds.

Range: 0 to 255

Units Seconds

Default 2

S7 Wait for Carrier after Dialing: S7

determines how long the modem waits for a

valid carrier signal after dialing.

Range: 0 to 255

Units Seconds

Default 80

S8 Comma Pause Time: S8 defines the

duration of the pause initiated by a comma

in the dialing string. The pause is generally

used when waiting for a second dial tone.

Range: 0 to 255

Units Seconds

Default 2

S12 Escape Code Guard Timer: S12 sets the

escape sequence guard timer. If characters

are received before or after the escape

sequence, within the guard timer, the modem

aborts the escape and remains in data mode.

Range: 10 to 255

Units 0.02 Seconds

Default 50

S14 Wait for Dial Tone Delay: S14 determines

how long the modem will wait for dial tone

when the W dial modifier is used.

Range: 0 to 255

Units Seconds

Default 12

S24 Sleep Inactivity Timer: S24 sets the

length of inactivity before the modem enters

sleep mode. Zero disables sleep mode.

Range: 0 to 255

Units: Seconds

Default: 0

S9 Carrier Detect Response Time: S9

establishes the length of time the remote

modem's carrier must be present to be

recognized as valid.

Range: 1 to 255

Units 0.1 Seconds

Default 6

S10 Carrier Off Disconnect Delay: S10

selects how long carrier must be lost before

the modem disconnects. If S10 is smaller

than S9 or S10 is set to 255, the modem

will not disconnect on any loss of carrier.

Range: 1 to 255

Units 0.1 Seconds

Default 14

S30 Disconnect Inactivity Timer: S30 sets

how long the modem remains on line with

no data flowing. Zero disables the timer.

Range: 0-255

Units: Minutes

Default: 0

S38 Hang Up Delay Timer: S38 determines

the maximum delay between receipt of the

ATH0 command and modem disconnect. .

Range: 0-255

Units: Seconds

Default:

20

S40 Test Data Pattern: S40 sets the test

pattern to be used by the AT&T4 and

AT&T5 commands

0 = All Spaces (0)

1 = A Marks (1)

2 = Random Data

XECOM

(16)

XE5690SM

Share Link: