25X32BVFIG Просмотр технического описания (PDF) - Winbond

Номер в каталоге

Компоненты Описание

Список матч

25X32BVFIG

32M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

Winbond 

W25X32BV

10.2.18 JEDEC ID (9Fh)

For compatibility reasons, the W25X32BV provides several instructions to electronically determine the

identity of the device. The Read JEDEC ID instruction is compatible with the JEDEC standard for SPI

compatible serial memories that was adopted in 2003.

The instruction is initiated by driving the /CS pin low and shifting the instruction code “9Fh”. The

JEDEC assigned Manufacturer ID byte for Winbond (EFh) and two Device ID bytes, Memory Type

(ID15-ID8) and Capacity (ID7-ID0) are then shifted out on the falling edge of CLK with most significant

bit (MSB) first as shown in figure 20. For memory type and capacity values refer to Manufacturer and

Device Identification table.

Figure 20. Read JEDEC ID

- 30 -

Share Link: