25X40BLSIG Просмотр технического описания (PDF) - Winbond

Номер в каталоге

Компоненты Описание

Список матч

25X40BLSIG

1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI

Winbond 

W25X10BL/20BL/40BL

9.2.24 JEDEC ID (9Fh)

For compatibility reasons, the W25X10BL/20BL/40BL provides several instructions to electronically

determine the identity of the device. The Read JEDEC ID instruction is compatible with the JEDEC

standard for SPI compatible serial memories that was adopted in 2003.

The instruction is initiated by driving the /CS pin low and shifting the instruction code “9Fh”. The

JEDEC assigned Manufacturer ID byte for Winbond (EFh) and two Device ID bytes, Memory Type

(ID15-ID8) and Capacity (ID7-ID0) are then shifted out on the falling edge of CLK with most significant

bit (MSB) first as shown in figure 25. For memory type and capacity values refer to Manufacturer and

Device Identification table.

15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Figure 25. Read JEDEC ID

- 38 -

Share Link: