datasheetbank_Logo
Технический паспорт Поисковая и бесплатно техническое описание Скачать

UPC1909 Просмотр технического описания (PDF) - NEC => Renesas Technology

Номер в каталоге
Компоненты Описание
Список матч
UPC1909
NEC
NEC => Renesas Technology NEC
UPC1909 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
TIMING CHART
Feedback input
FB
Oscillation
waveform CT
Oscillation
waveform CT
µPC1909
Vd
OUT1
output waveform
tqc
tqd
OUT2
output waveform
(1) Oscillation waveform (CT)
This waveform is determined by the external capacitor connected to the CT pin (pin 16) and the external resistor
connected to the RT pin (pin 15). It is usually a 1.5-V to 3.5-V triangle waveform (the rise and fall times are the
same).
(2) Output waveform (OUT1)
Whichever is the lower of the DTC1 pin (pin 13) and FB pin (pin 12) voltages is compared with the triangle wave
of the CT pin (pin 16). The OUT1 pin (pin 11) is high level while the triangle wave is low.
(3) Output waveform (OUT2)
Whichever is the higher of the DTC2 pin (pin 5) and FB pin (pin 12) voltages is compared with the level-shifted
triangle wave (CT’). The OUT2 pin (pin 6) is high level while the level-shifted triangle wave is high.
(4) Triangle wave level shift
The triangle wave that controls OUT2 is the original triangle wave of the CT pin (pin 16) shifted to a lower
potential via the level shift circuit (OLS). The amount of shift (Vd) can be adjusted using the resistor (RCT2)
connected between the CT2 pin (pin 2) and the VREF pin.
The relationship between the shift amount (Vd) and the resistance value (k) of the resistor RCT2 connected to
the CT2 pin (pin 2) is as follows.
Vd =
4.3
× 2 [V]
RCT2[k] + 10
(5) Dead-time (tqc, tqd) adjustment
The dead time between the fall of OUT1 and the rise of OUT2 (tqc) and the dead time between the fall of OUT2
and the rise of OUT1 (tqd) is determined by the oscillation frequency and the amount of level shift of the triangle
wave. Although usually tqc = tqd, if setting these independently, connect a suitable resistor between the CT pin
and the VREF pin, as well as between the CT pin and GND, and adjust the dead time by making the oscillation
waveform asymmetrical.
Data Sheet G14309EJ1V0DS00
9

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]