XE3386 Просмотр технического описания (PDF) - Xecom

Номер в каталоге

Компоненты Описание

Список матч

XE3386

Compact 33,600 BPS Data and Fax Modem

Xecom 

XE3386L FCC Instructions

This product complies with Part 68 of the FCC Rules and Regulations. Each device shipped includes a label which

contains the FCC Registration Number and Ringer Equivalence (REN). If requested, this FCC information must be

provided to the telephone company. A registration label must be affixed to the cabinet's exterior for each device

mounted within a closed assembly.

Ringer Equivalence (REN) is used to calculate the number of devices you may connect to one telephone line and still

have all of the devices respond to an incoming call. Typically, the sum of the RENs of all devices connected to one

line should not exceed five (5.0). Contact your local telephone company to determine the maximum REN for your

area.

Mount this device in the final assembly so as to prevent exposure to any hazardous voltages in the system and to

preserve the high voltage protection between Tip/Ring and the rest of the system. Installation must provide adequate

separation and restraint of cables and cords. Xecom recommends maintaining a minimum of .100 inches between the

Tip and Ring traces and all other circuits. No circuitry may be added between Tip/Ring and the telephone line

connection unless specifically allowed by the rules.

This device requires use of an RSOC RJ-11C jack for the telephone line connection. The jack selected must be

certified to meet FCC Part 68 subpart F requirements.

If you experience trouble with this device, contact XECOM at (408)945-6640 to obtain service. There are no repairs

the customer may make to this device. If your system causes harm to the telephone network, the telephone company

may discontinue service temporarily until the problem has been corrected or it is demonstrated that the device is not

malfunctioning. If possible, you will be notified in advance that service is being discontinued. If advance notice is not

practical, you will be notified as soon as possible.

Your telephone company may make changes to their facilities, equipment, or operation that affect proper functioning

of your equipment. You will be notified in advance of such changes to give you the opportunity to maintain

uninterrupted telephone service.

This device cannot be used on coin operated telephone lines provided by the telephone company. Connection of this

equipment to party lines is subject to state tariffs.

Any one using this device for fax transfer must include sender identification information as required in the Telephone

Consumer Protection Act of 1991. The Telephone Consumer Protection Act of 1991 makes it unlawful to send a fax

without clearly identifying the fax sender (business or individual) and the number of the transmitting fax machine.

This information may be provided either on the first page of the fax or in the top or bottom margin of each page. The

number listed may not be a 900 number or other number for which charges exceed local or long distance transmission.

The final assembler must provide these FCC instructions to the end user of the equipment.

XECOM

(15)

XE3386L

Share Link: