TLRMHGH48M(F)(2007) Просмотр технического описания (PDF) - Toshiba
Номер в каталоге
Компоненты Описание
Список матч
TLRMHGH48M(F) Datasheet PDF : 3 Pages
| |||
TLRMHGH48M(F)
TOSHIBA LED LAMP InGaAlP RED/GREEN LIGHT EMISSION
TLRMHGH48M(F)
○ BI-COLOR HIGH LUMINOSITY INDICATOR
• Lead(Pb) free(Sn-Ag-Cu)
• High Luminous Intensity.
• 5mm package
• InGaAlP Red/Green LED, the cathode is common to two colors.
• All plastic mold type.
• Milky white, diffusion lens.
Absolute Maximum Ratings (Ta = 25°C)
Unit: mm
CHARACTERISTICS
SYMBOL
RATING
UNIT
Stopper
FORWARD CURRENT
IF
50 (Note)
mA
REVERSE VOLTAGE
VR
4
V
POWER DISSIPATION
Topr
−40~100
°C
OPERATING TEMPERATURE
Tstg
−40~120
°C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
Anode(Red)
Common Cathode
Anode(Green)
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the
JEDEC
―
Toshiba Semiconductor Reliability Handbook (“Handling
JEITA
―
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
TOSHIBA
4-5AR1
etc).
Note1:Maximum rating of “forward current – atmospheric
Weight: 0.37 g (typ.)
temperature (i.e. IF-Ta graph in the next page)” is for each
component.
In case two components lightening, total current should be within the rating.
PRECAUTIONS
Please be careful of the followings
• Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of
the device )
• If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress
to the resin. Soldering should be performed after lead forming.
• The visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTICS
SYMBOL TEST CONDITION
MIN
TYP
MAX
UNIT
FORWARD VOLTAGE
REVERSE CURRENT
LUMINOUS INTENSITY
SPECTRAL LINE HALF WIDTH
DOMINANT WAVELENGTH
Red
Green
Red
Green
Red
Green
Red
Green
Red
Green
VF
IF = 20mA
IR
VR = 4V
IV
IF = 20mA
Δλ
IF = 20mA
λd
IF = 20mA
⎯
1.95
2.4
V
⎯
2.05
2.4
⎯
⎯
50
uA
⎯
⎯
50
272
450
153
220
⎯
mcd
⎯
⎯
13
⎯
nm
⎯
13
⎯
⎯
626
⎯
nm
⎯
571
⎯
1
2007-10-01
Share Link: 