TDA7411 Просмотр технического описания (PDF) - STMicroelectronics

Номер в каталоге

Компоненты Описание

Список матч

TDA7411

ADVANCED CAR SIGNAL PROCESSOR

STMicroelectronics 

TDA7411

Mute Capability of Audio Processor

The main channel and the sub channel of the TDA7411 can be muted after the Source selectors. This

mute (no soft mute!) must be started by I2C bus.

The digitally controlled SoftMute stages are placed in the speaker and allow muting/demuting of the signal

with an I2C-bus programmable slope. The mute process can either be activated by the SoftMute pin or by

the I2C-bus. The slope is realized in a special S-shaped curve to mute slowly in the critical regions (see

Figure 3).

Figure 3. Soft mute-Timing

Note: Please notice that a started Mute-action is always terminated and could not be interrupted by a

change of the mute -signal.

Using the IIC bus control the soft mute can be activated independently for FrontL, FrontR, Rear and Free.

For timing purposes the Bit 3 of the I2C-bus output register is set to 1 as soon as the soft mute of any

speaker is started until the end of demuting of all speakers. The Mute pin is able to work as monitor for

the same signal. The standard function of the pin is not influenced by the monitor function.

10/43

Share Link: