XE924 Просмотр технического описания (PDF) - Xecom

Номер в каталоге

Компоненты Описание

Список матч

XE924

Base access point for multiple remote machines.

Xecom 

Embedded Modem AT Commands

An asterisk indicates the factory default

A Answer Command - forces the smart transceiver

respond to a summons from another wirless device.

Dn Initate a Wireless Link - attempts to establish a

connection with the transceiver at address n.

In Identification - displays product identificaton code.

n=0 Display Product Code

n=1 Display Product Name

n=2 Display Model Number

n=3 Display Copywrite

n=4 Display Firmware Revision

Qn Result Code Display - determines if results codes

will be displayed.

n=0 Display Result Codes *

n=1 Do not Display Result Codes

Sn= Set Value of Register Sn

Sn=? Read Value of Register Sn

Vn Response Type - selects Full Word or Numeric

responses

n=0 Numeric Responses

n=1 Full Word Responses *

Zn Reset - executes a soft Reset

n=0 Reset to Values Stored in User Profile 0 *.

n=1 Reset to Values Stored in User Profile 1

&F Restore Factory Settings - returns all configuration

commands and registers to their factory default values.

&V View Active Configuration - sends the active

configuration data to the system host.

&Wn Store Current Configuration - loads the current

XE900 configuration into either User Profile 0 or User

Profile 1.

n=0 load configuration into User Profile 0

n=1 load configuration into User Profile 1

#B Wireless Broadcast Mode - intiates wireless

boradcast mode for diagnostic purposes.

#ID= Set ID Value for the XE900

#ID=?Read ID Value from the XE900

#Ln Check RSSI Level - Displays current Wireless

recevied signal levels

n=0 Display a single value *

n=1 Display 4 Values

n=2 Display continuous values

XECOM

(15)

XE924

Share Link: