Philips Semiconductors
DECT baseband controller
Objective specification
PCD5093
1 FEATURES
• 80C51 ports P0, P1, P2 and P3 available for interfacing
to display, keyboard, I2C-bus, interrupt sources and/or
external memory. Integrated 64 kbyte ROM, 3 kbytes of
data memory and 1 kbyte SDR-RAM. External program
memory is addressable up to 128 kbytes
• +2.7 to +5 V port (P0 to P3) interface
• TDMA frame (de)multiplexing. Transmission or
reception can be programmed for any slot
• Ciphering, scrambling, CRC checking/generation and
protected B-fields
• Speech and data buffering space for six handsets
• Local call and B-field loop-back
• Two interrupt lines for BML and DSP to interrupt 80C51
• On-chip, three-channel time-multiplexed 8-bit
Analog-to-Digital Converter (ADC) for RSSI
measurement, one for battery voltage measurement
and one channel available for other purposes
• On-chip 8-bit Digital-to-Analog Converter (DAC) for
electronic potentiometer function
• Phase error measurement and phase error correction by
hardware
• DACs and ADCs for dynamic earpiece and dynamic or
electret microphone
• On-chip reference voltage
• On-chip supply for electret microphone
• Very low ohmic buzzer output
• Serial interface to external ADPCM CODEC (PCD5032)
or 8 kHz u-law samples
• Speech switch for Digital Telephone Answering
Machine (DTAM) connected to SPI interface
• IOM-2 interface (Siemens registered trademark)
• Serial interface to synthesizer for frequency
programming
• Programmable polarity and timing of radio-control
signals
• GMSK pulse shaper
• Easy interfacing with radio circuits, operating at other
supply voltages (RF supply pin with level shifter for RF
signals)
• On-chip comparator for use as data-slicer
• Low power oscillator with integrated frequency
adjustment
• QFP100 package
• Power-on-reset
• Low supply voltage (2.7 to 3.6 V)
• CMOS technology.
1.1 DSP software features
• ADPCM encoding and decoding complying with G.721
• Up to two A-law channels
• Network echo suppressor
• Support of local corded handset with handsfree feature
• Speech filters
• Programmable gain in speech paths
• Side tone and soft mute
• Ringer and tone (DTMF) generator
• Automatic gain control
• Direct connection to universal codec PCD5096
• Conference between IOM-2 buffer(s) and two handsets.
For each DSP software version a separate manual is
available in which detailed information is provided on how
parameters must be set. For further information please
contact Philips Semiconductors.
2 GENERAL DESCRIPTION
The PCD5093 is designed as GAP-compliant basestation
chip for ISDN or n lines (PCD5096) business systems. It
has an embedded 80C51 microcontroller with twice the
performance of the classic architecture, 64 kbytes of
PROM program memory and 3 kbytes of data memory on
chip. In addition there is 1 kbyte of on-chip data memory
that is shared with on-chip Burst Mode Logic (BML) and
DSP, the System Data RAM (SDR).
3 ORDERING INFORMATION
TYPE
NUMBER
PCD5093H
NAME
QFP100
PACKAGE
DESCRIPTION
plastic quad flat package; 100 leads (lead length 1.95 mm);
body 14 × 20 × 2.8 mm
VERSION
SOT317-2
1997 Jul 21
3