MAX4615EPD Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
Список матч
MAX4615EPD Datasheet PDF : 12 Pages
| |||
Low-Voltage, High-Speed, Quad, SPST
CMOS Analog Switches
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND)
V+, IN_......................................................................-0.3V to +6V
COM_, NO_, NC_ (Note 1) .........................-0.3V to (V+ + 0.03V)
Continuous Current (any terminal)....................................±75mA
Peak Current (NO_, NC_, COM_)
(pulsed at 1ms, 10% duty cycle).................................±200mA
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C) ..........500mW
14-Pin Narrow SO (derate 8.00mW/°C above +70°C) ..640mW
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)...800mW
Operating Temperature Ranges
MAX461_C_ _ ......................................................0°C to +70°C
MAX461_E_ _....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Signals on NO_, NC_, or COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, VIN_H = 2.4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Note 2)
PARAMETER
ANALOG SWITCH
Analog Signal Range
(Note 3)
SYMBOL
VCOM_,
VNO_,
VNC_
CONDITIONS
MIN TYP MAX UNITS
0
V+
V
On-Resistance
RON
V+ = 4.5V,
ICOM_ = 10mA,
VNO_ = VNC_= 3V
TA = +25°C
TA = TMIN to TMAX
8
10
Ω
13
On-Resistance Match Between
Channels (Note 4)
On-Resistance Flatness
(Note 5)
∆RON
V+ = 4.5V,
ICOM_ = 10mA,
VNO_ = VNC_= 3V
RFLAT(ON)
V+ = 4.5V;
ICOM_ = 10mA;
VNO_ = VNC_= 3V,
2V, 1V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
0.2
1
Ω
1.2
0.3
1
Ω
1.2
NO_ or NC_ Off-Leakage
Current (Note 6)
INO(OFF)
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = 4.5V, 1V
TA = +25°C
TA = TMIN to TMAX
-1
0.01
1
nA
-6
6
COM_ Off-Leakage Current
(Note 6)
COM_ On-Leakage Current
(Note 6)
ICOM(OFF)
ICOM(ON)
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = VNC_= 4.5V,
1V
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = VNC_= 1V,
4.5V, or floating
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
-1
0.01
1
nA
-6
6
-2
0.02
2
nA
-12
12
2 _______________________________________________________________________________________
Share Link: 