M62211FP Просмотр технического описания (PDF) - Renesas Electronics

Номер в каталоге

Компоненты Описание

Список матч

M62211FP

General Purpose Multi Function DC/DC Converter

Renesas Electronics 

M62211P/FP

[Mode Explained]

[I] Mode….............Activation

This is used when the FB terminal goes down to the control state potential when the DTC terminal is in up

slope. In order for the activation to occur when the DTC terminal is in down slope, the FB terminal potential

must go below the DTC terminal before the DTC terminal goes to 0.45 V.

[II] Mode…........... Output short → Activation

The system is activated if the FB terminal potential goes below the DTC terminal potential before the DTC

terminal goes to 0.45 V. If there is not enough time, the output is turned OFF. (Latched)

[III] Mode….......... ON/OFF Control → Activation

This mode turns off the output by forcing the DTC terminal to go down. (The system) returns as in the case

of the activation.

[IV] Mode….......... Output short (Latch)

The output is turned OFF when the FB terminal potential did not go down to the control state before the DTC

terminal went down to 0.45 V.

REJ03D0842-0201 Rev.2.01 Nov 14, 2007

Page 9 of 11

Share Link: