IS61LV6432-7(1998) Просмотр технического описания (PDF) - Integrated Circuit Solution Inc
Номер в каталоге
Компоненты Описание
Список матч
IS61LV6432-7 Datasheet PDF : 16 Pages
| |||
IS61LV6432
IS61LV6432
64K x 32 SYNCHRONOUS
PIPELINE STATIC RAM
ISSISISI®®
MAY 1998
FEATURES
• Internal self-timed write cycle
• Individual Byte Write Control and Global Write
• Clock controlled, registered address, data and
control
• Pentium™ or linear burst sequence control
using MODE input
• Three chip enables for simple depth expansion
and address pipelining
• Common data inputs and data outputs
• Power-down control by ZZ input
• JEDEC 100-Pin TQFP and PQFP package
• 3.3V VCC and 2.5V VCCQ for 2.5 I/O's
• Two Clock enables and one Clock disable to
eliminate multiple bank bus contention.
• Control pins mode upon power-up:
– MODE in interleave burst mode
– ZZ in normal operation mode
These control pins can be connected to GNDQ
or VCCQ to alter their power-up state
• Industrial temperature available
DESCRIPTION
The ISSI IS61LV6432 is a high-speed, low-power synchro-
nous static RAM designed to provide a burstable, high-
performance, secondary cache for the Pentium™, 680X0™,
and PowerPC™ microprocessors. It is organized as 65,536
words by 32 bits, fabricated with ISSI's advanced CMOS
technology. The device integrates a 2-bit burst counter, high-
speed SRAM core, and high-drive capability outputs into a
single monolithic circuit. All synchronous inputs pass through
registers controlled by a positive-edge-triggered single clock
input.
Write cycles are internally self-timed and are initiated by the
rising edge of the clock input. Write cycles can be from one to
four bytes wide as controlled by the write control inputs.
Separate byte enables allow individual bytes to be written.
BW1 controls DQ1-DQ8, BW2 controls DQ9-DQ16, BW3
controls DQ17-DQ24, BW4 controls DQ25-DQ32, conditioned
by BWE being LOW. A LOW on GW input would cause all bytes
to be written.
Bursts can be initiated with either ADSP (Address Status
Processor) or ADSC (Address Status Cache Controller) input
pins. Subsequent burst addresses can be generated inter-
nally by the IS61LV6432 and controlled by the ADV (burst
address advance) input pin.
Asynchronous signals include output enable (OE), sleep mode
input (ZZ), clock (CLK) and burst mode input (MODE). A HIGH
input on the ZZ pin puts the SRAM in the power-down state.
When ZZ is pulled LOW (or no connect), the SRAM normally
operates after three cycles of the wake-up period. A LOW
input, i.e., GNDQ, on MODE pin selects LINEAR Burst. A VCCQ
(or no connect) on MODE pin selects INTERLEAVED Burst.
FAST ACCESS TIME
Symbol
tKQ
tKC
—
Parameter
CLK Access Time
Cycle Time
Frequency
-166
5
6
166
-133 -117 -5
-6
-7
-8
5
5
5
6
7
8
7.5
8.5 10 12 13 15
133 117 100 83 75 66
Unit
ns
ns
MHz
This document contains PRELIMINARY data. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible product.
We assume no responsibility for any errors which may appear in this publication. © Copyright 1997, Integrated Silicon Solution, Inc.
Integrated Silicon Solution, Inc.
1
PRELIMINARY SR018-1C
06/01/98
Share Link: 