HD6432633TE16 Просмотр технического описания (PDF) - Renesas Electronics
Номер в каталоге
Компоненты Описание
Список матч
HD6432633TE16 Datasheet PDF : 1487 Pages
| |||
H8S/2633 Group
H8S/2633F-ZTAT H8S/2633
H8S/2632
H8S/2631
Operating 25 MHz operation version
voltage
range
PVCC = 4.5 V to 5.5 V, VCC = PLLVCC = 3.0 V to 3.6 V, AVCC = 4.5 V to 5.5
V, Vref = 4.5 V to AVCC
16 MHz operation version (low-voltage version)
PVCC = 3.0 V to 5.5 V, VCC = PLLVCC = 3.0 V to 3.6 V
[When using A/D or D/A]
AVCC = 3.6 V to 5.5 V, Vref = 3.6 V to AVCC
[When not using A/D or D/A]
AVCC = 3.3 V to 5.5 V, Vref = 3.3 V to AVCC
Power
supply
pins
2 power supply configurations, PVCC (5 V power supply) and
VCC (3 V power supply), PLLVCC is 3 V power supply
H8S/2633R Group
H8S/2633RF-ZTAT
H8S/2695
PVCC = 4.5 V to 5.5 V
(Single power supply version lacking VCC
and PLLVCC pins)
AVCC = 4.5 V to 5.5 V
Vref = 4.5 V to AVCC
• PVCC (5 V power supply) single power
supply configuration
• Do not connect the VCL pin to the
power supply. Instead, connect it to a
ground via a 0.1 µF power supply
stabilizer capacitor (which should be
mounted close to the pin).
• Do not connect the VCC power supply
to the VCL pin.
• Note that the VCL pin is located in the
same position as the VCC pin on the
older H8S/2633 Group and
H8S/2633F.
External
capacitor
0.1 µF
VCL (pin 11: FP128B)
(pin 7: TFP120)
VSS (pin 9: FP128B)
(pin 5: TFP120)
EXTAL VIH: VCC × 0.8 V to VCC + 0.3 V
input level VIL: –0.3 V to VCC × 0.2 V
(VCC = 3.0 V to 3.6 V)
Interrupt External interrupts: NMLIRQ7 to IRQ0
sources Internal interrupts: 72 sources
32 kHz Yes (subactive mode, subsleep mode, and watch mode supported)
oscillator
• There is no PLLVCC power supply pin.
VIH: PVCC × 0.8 V to PVCC + 0.3 V
VIL: –0.3 V to PVCC × 0.2 V
(PVCC = 4.5 V to 5.5 V)
External interrupts:
NMLIRQ7 to IRQ0
Internal interrupts:
49 sources
No (subactive
mode, subsleep
mode, and watch
mode not
supported)
Rev. 5.00 Mar 28, 2005 page viii of lxii
Share Link: 