Optical disc ICs
BA6892FP
FOperation notes
(1) The BA6892FP has an internal thermal shutdown
circuit. Output current is muted when the chip tempera-
ture exceeds 175_C (typically) and restored when the
chip temperature falls to 150_C (typically).
(2) The mute pin operates normally when open and at
the LOW level (below 0.5V), but mutes the output when
raised to the HIGH level (above 2V). A high impedance
is output during muting. The mute pin functions indepen-
dently for each channel.
(3) Dead zone width is determined as follows:
Dead zone width = input resistance (attached resistor +
internal input resistor 1kΩ) 0.2µA
Dead zone width various according to the gain setting as
defined in the preceding equation.
Example: When attached input resistor = 9.1kΩ, VDB =
(9.1k+1k) 0.2µ 2mV
Output pins output high impedance in a dead zone equal
to AmV (total for positive and negative).
(4) Be sure to connect the IC to a 0.1µF bypass capaci-
tor to the power supply, at the base of the IC.
(5) Connect the radiating fin to an external ground.
FElectrical characteristic curves
453