DF1B Просмотр технического описания (PDF) - HIROSE ELECTRIC
Номер в каталоге
Компоненты Описание
Список матч
DF1B Datasheet PDF : 17 Pages
| |||
sProduct Specifications
Rating
Current rating
(Note1)
Voltage rating
Cable Size
AWG 20 to 24 : 3A
AWG 26 : 2A
AWG 28 : 1A
AWG 30 : 0.5A
250V AC
Rating
UL-CSA Safety Standard Standardized Value
Current rating
(Note1)
Voltage rating
Cable Size
AWG 20 to 22: 3A
AWG 24 to 28: 1A
AWG 30 : 0.5A
30V AC
Operating Temperature Range -35 to +85ç (Note2)
Operating Moisture Range
-40 to 80%
Storage Temperature Range -10 to +60ç (Note3)
Storage Moisture Range
-40 to 70% (Note3)
sUL CSA Safety File No.
UL : E52653
CSA : LR95109
Item
Specification
Condition
1. Insulation Resistance 1000M ohms Min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance 30m ohms Max
100mA
4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf)
Measure at the square steel pin of 0.635±0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle
(-55ç: 30 minutes ➝ 15 to 35ç: 2 to 3 minutes
Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.
(-85ç: 30 minutes ➝ 15 to 35ç: 2 to 3 minutes) 5 cycles
8. Operating Life
Contact resistance: 30m ohms max.
Tin plating : 30 cycles
Gold plating : 50 cycles
9. Resistance to Soldering heat No deformation of components affecting performance.
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product
Part
Material
Socket
Insulator
Polyamide
ID Contact for Socket
Contact
Phosphor copper
Crimping Contact for Socket
Contact
Phosphor copper
Pin Header
Insulator
Contact
Polyamide
Brass
In-line Plug
Insulator
Polyamide
ID Contact for In-line Plug
Contact
Phosphor copper
Crimping Contact for In-line Plug
Contact
Phosphor copper
Note: The whisker method is implemented for tin plating.
Finish
White
Tin plated or gold plated
Tin plated or gold plated
White
Tin plated or gold plated
White
Tin plated or gold plated
Tin plated or gold plated
Remarks
UL94V-0
––––––
––––––
UL94V-0
––––––
UL94V-0
––––––
––––––
B155
Share Link: 