MB91F155 Просмотр технического описания (PDF) - Fujitsu

Номер в каталоге

Компоненты Описание

Список матч

MB91F155

32-bit Proprietary Microcontrollers

Fujitsu 

MB91F155/MB91154

Pin No.

Pin name

64

INT4/PC4/CS0

65

INT5/PC5/CS1

66

INT6/PC6/CS2

67

INT7/PC7/CS3

69 PD0/AIN0/INT8/TRG0

70 PD1/BIN0/INT9/TRG1

71 PD2/AIN1/INT10/TRG2

72 PD3/BIN1/INT11/TRG3

73 PD4/ZIN0/INT12/TRG4

74 PD5/ZIN1/INT13/TRG5

75

PD6/DEOP2/INT14

76

PD7/ATG/INT15

Circuit

type

H

H

H

H

Function

These pins also serve as the chip select output and external inter-

rupt request input 4-7.

When the chip select output is not allowed, these pins are available

as external interrupt requests or ports.

Since this input is used more or less continuously when the corre-

sponding external interrupt is allowed, output by the port needs to

be stopped except when it is performed deliberately.

Since this port is also allowed to input in standby mode, the port can

be used to reset the standby state.

These pins are available as ports when external interrupt request

input and chip select output are not in use.

External interrupt request input 8-13

Since this input is used more or less continuously when the corre-

sponding external interrupt is allowed, output by the port needs to

be stopped except when it is performed deliberately.

[AIN, BIN] Up/down timer input.

[TRG] PPG external trigger input.

Since this input is used more or less continuously while input is al-

lowed, output by the port needs to be stopped except when it is per-

formed deliberately.

These pins are available as ports when the external interrupt re-

quest input, up timer counter input, and PPG external trigger input

are not in use.

External interrupt request input 14

Since this input is used more or less continuously when the corre-

sponding external interrupt is allowed, output by the port needs to

be stopped except when it is performed deliberately.

[DEOP2] DMA external transfer end output.

This function is enabled when DMAC external transfer end output

is allowed.

This pin is available as a port when it is not in use as the external

interrupt request input or DMA external transfer end output.

External interrupt request input 15

Since this input is used more or less continuously when the corre-

sponding external interrupt is allowed, output by the port needs to

be stopped except when it is performed deliberately.

[ATG] A/D converter external trigger input.

Since this input is used more or less continuously when selected as

an A/D activation factor, output by the port needs to be stopped ex-

cept when it is performed deliberately.

This pin is available as a port when it is not in use as the external

interrupt request input or A/D converter external trigger input.

(Continued)

7

Share Link: