CXA1812Q
∗Externally applied voltage
Pin
Pin
Symbol
No.
voltage
Equivalent circuit
Description
Video output chroma signal input.
Coupled by means of a capacitor within
VCC
the IC.
Inputting a signal of –0.3 V or less may
7
CIN
—
7
150 20p
lead waveform distortion.
2.2V
80µ
GND
143mVp-p
314mVp-p
8 COUTVCC 4.75 V∗
—
Chroma 75 Ω driver power supply.
9 YOUTVCC 4.75 V∗
—
Y 75 Ω driver power supply.
10
SEL1
0V
Same as for Pin 6.
Control input used for switching the
signals that are input from Pins 11
(EVFYIN) and 13 (YIN).
Low (0 to 0.8 V) :
signal at Pin 13 is selected
High (2 V to VCC) :
signal at Pin 11 is selected
2.5 V
11
EVFYIN (Sync tip) 11
Y signal input for viewfinder.
VCC Coupled by means of a capacitor ; in
order to keep clamp error to a
minimum, keep the input impedance as
low as possible.
1100
1µ
50µ
GND
2.5V
0.5Vp-p
20µ
12 P. SAVE
0V
12
150
VCC Control input for power saver. When in
power saving mode, the Y and C 75 Ω
drivers stop operating. The output of
Pin 31 (YOUT) and Pin 5 (COUT) goes
to high impedance.
Low (0 to 0.8 V) : normal operation
GND High (2 V to VCC) : power saving mode
—4—