V43648Z04VTG-75 Просмотр технического описания (PDF) - Mosel Vitelic Corporation
Номер в каталоге
Компоненты Описание
Список матч
V43648Z04VTG-75 Datasheet PDF : 11 Pages
| |||
MOSEL VITELIC
V43648Z04V(C)TG-75
5. If clock rising time is longer than 1 ns, a time (tT/2 -0.5) ns has to be added to this parameter.
6. Rated at 1.5V
7. If tT is longer than 1 ns, a time (tT -1) ns has to be added to this parameter.
8. Any time that the refresh Period has been exceeded, a minimum of two Auto (CBR) Refresh commands must be
given to “wake-up” the device.
9. Self Refresh Exit is a synchronous operation and begins on the 2nd positive clock edge after CKE returns high. Self
Refresh Exit is not complete until a time period equal to tRC is satisfied once the Self Refresh Exit command is reg-
istered.
10. Referenced to the time which the output achieves the open circuit condition, not to output voltage levels.
11. tDAL is equivalent to tDPL + tRP.
Package Diagram
144 Pin SODIMM
0.039
1
28
29
Pin 2 on Backside
2.661
NOTE:
1. All dimensions in inches.
Tolerances ±0.005 unless otherwise specified.
1.25
.787
Typ.
.157
143
Pin 144 on Backside
0.140
V43648Z04V(C)TG-75-04
V43648Z04V(C)TG-75 Rev. 1.3 October 2000
9
Share Link: 