BA4560F(2014) Просмотр технического описания (PDF) - ROHM Semiconductor
Номер в каталоге
Компоненты Описание
Список матч
BA4560F Datasheet PDF : 52 Pages
| |||
BA4560xxx BA4560Rxxx BA4564RFV BA4564WFV
Datasheet
Absolute Maximum Ratings (TA=25℃)
Parameter
Symbol
Ratings
Unit
BA4560xxx BA4560Rxxx BA4564RFV BA4564WFV
Supply Voltage
VCC-VEE
+36
V
SOP8
0.55(Note1,6) 0.69(Note1,6)
-
-
SOP-J8
0.54(Note2,6) 0.67(Note2,6)
-
-
Power Dissipation
SSOP-B8 0.50(Note3,6) 0.62(Note3,6)
-
PD
TSSOP-B8 0.50(Note3,6) 0.62(Note3,6)
-
-
W
-
MSOP8
0.47(Note4,6) 0.58(Note4,6)
-
-
SSOP-B14
-
-
0.87(Note5,6) 0.87(Note5,6)
Differential Input Voltage(Note 7)
Input Common-mode Voltage
Range
Input Current(Note 8)
VID
VCC-VEE
+36
V
VICM
VEE to VCC
(VEE-0.3) to VEE+36
V
II
-10
mA
Operating Supply Voltage Range
Vopr
+8 to +30 (±4 to ±15)
V
Operating Temperature Range
Topr
-40 to +85
-40 to +105
℃
Storage Temperature Range
Tstg
-55 to +125
-55 to +150
℃
Maximum Junction Temperature
TJMAX
+125
+150
℃
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause
deterioration of characteristics.
(Note 1)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
To use at temperature above TA＝25℃ reduce 5.5mW.
To use at temperature above TA＝25℃ reduce 5.4mW.
To use at temperature above TA＝25℃ reduce 5.0mW.
To use at temperature above TA＝25℃ reduce 4.7mW.
To use at temperature above TA＝25℃ reduce 7.0mW.
(Note 6) Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
(Note 7) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 8) An excessive input current will flow when input voltages of less than VEE-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. In addition, it is impossible to predict all destructive situations such as
short-circuit modes, open circuit modes, etc. Therefore, it is important to consider circuit protection measures, like adding a fuse, in case the IC is
operated in a special mode exceeding the absolute maximum ratings.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111･15･00
4/48
TSZ02201-0RAR1G200020-1-2
19.Nov.2014 Rev.003
Share Link: 