APL3213AQBI-TRG Просмотр технического описания (PDF) - Anpec Electronics

Номер в каталоге

Компоненты Описание

производитель

APL3213AQBI-TRG

Li+ Charger Protection IC

Anpec Electronics 

APL3213/A

Function Description

Power-Up

The APL3213/A have a built-in power-on-reset circuit to

keep the output shutting off until internal circuitry is oper-

ating properly. The POR circuit has hysteresis and a

deglitch feature so that it will typically ignore undershoot

transients on the input. When input voltage exceeds the

POR threshold and after 8ms blanking time, the output

voltage starts a soft-start to reduce the inrush current.

Input Over-Voltage Protection (OVP)

The input voltage is monitored by the internal OVP circuit.

When the input voltage rises above the input OVP

threshold, the internal FET will be turned off within 1µs to

protect connected system on OUT pin. When the input

voltage returns below the input OVP threshold minus the

hysteresis, the FET is turned on again after 8ms recovery

time. The input OVP circuit has a 200mV hysteresis and

a recovery time of T

to provide noise immunity

ON(OVP)

against transient conditions.

Over-Temperature Protection

When the junction temperature exceeds 140οC, the inter-

nal thermal sense circuit turns off the power FET and

allows the device to cool down. When the device’s junc-

tion temperature cools by 20οC, the internal thermal sense

circuit will enable the device, resulting in a pulsed output

during continuous thermal protection. Thermal protec-

tion is designed to protect the IC in the event of over-

temperature conditions. For normal operation, the junc-

tion temperature cannot exceed TJ=+125 οC.

VACIN

VPOR

VOVP

VOUT

Figure 2. OVP Timing Chart

Copyright © ANPEC Electronics Corp.

9

Rev. A.3 - Aug., 2011

www.anpec.com.tw

Share Link: