AA51880 Просмотр технического описания (PDF) - Agamem Microelectronic Inc.
Номер в каталоге
Компоненты Описание
Список матч
AA51880 Datasheet PDF : 10 Pages
| |||
PRELIMINARY
14-pin DIP
AA51880 Agamem Microelectronics Inc.
SERVO MOTOR CONTROLLER
SYMBOLS MIN. NOR. MAX.
A
---
--- 0.210
A1
0.015 ---
---
A2
0.125 0.130 0.135
D
0.735 0.750 0.775
E
0.300 BSC.
E1
0.245 0.250 0.255
L
0.115 0.130 0.150
eB
0.335 0.355 0.375
θ。
0
7
15
UNIT : INCH
NOTES:
1. JEDEC OUTLINE : MS-001 AA
2. “D”, “E1” DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS MOLD FLASH OR PROTRUSIONS
SHALL NOT EXCEED 0.010 INCH.
3. eB IS MEASURED AT THE LEAD TIPS WITH THE LEADS UNCONSTRAINED.
4. POINTED OR ROUNDED LEAD TIPS ARE PREFERRED TO EASE INSERTION.
5. DISTANCE BETWEEN LEADS INCLUDING DAM BAR PROTRUSIONS TO BE 0.005 INCH MININUM.
DATUM PLANE “H” COINCIDENT WITH THE BOTTOM OF LEAD WHERE LEAD EXITS BODY.
■ NOTES ON USE
• The application circuit examples explain typical applications of the products, and do not
guarantee the success of any specific mass-production design.
• Application circuit diagrams and circuit constants contained herein are shown as examples of
standard use and operation. Please pay careful attention to the peripheral conditions when
designing circuits and deciding upon circuit constants in the set.
• Take account of common impedance when designing the earth line on a printed wiring board.
©Copyright Agamem Microelectronics Inc.
10
www.agamem.com.tw 2008/4/22
AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE
TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
Share Link: 