7B34-01-1 Просмотр технического описания (PDF) - Analog Devices
Номер в каталоге
Компоненты Описание
Список матч
7B34-01-1 Datasheet PDF : 8 Pages
| |||
Input Offset vs. Temperature
Zero Suppression vs. Temperature
Span vs. Temperature
Output Offset vs. Temperature
Lead Resistance Effect
5 MHz Bandwidth
10 Hz to 100 kHz Bandwidth
0.1 Hz to 10 Hz Bandwidth
Bandwidth, -3 dB
Output Rise Time, 10% to 90% Span
Input-to-Output and Power
Common Mode Rejection (CMR)
Input-to-Output and Power @ 50/60 Hz
Normal Mode Rejection @ 50/60 Hz
Input Protection
Input Transient Protection
Output Resistance
Voltage Output Protection
Voltage Range, Operating
Current
Sensitivity
Mechanical Dimensions
Weight
Temperature Range
Operating
Storage
Relative Humidity, 24 hours
ESD Sensitivity
RFI Susceptibility
±1 µV/°C
±0.002% (Rz/Rspan)3/°C
±60 ppm/°C
±0.002% Span/°C
±0.02°C /Ω
Output Noise
10 mV peak
0.4 mV rms
0.6 µV peak
3 Hz
250 ms
Common-Mode Voltage (CMV)
1500 V rms, continuous
160 dB
60 dB
120 V rms, continuous±35 V dc, continuous
ANSI/IEEE C376.90.1-1989
IEEE-STD 472
IEC 255-4, Class II
<1Ω
Continuous Short to Ground
Power Supply
+14 V dc to +35 V dc
+25 mA, maximum
±0.0001%/% of Vs
1.663" x 2.11" x 0.563"(42.24 mm x 53.6 mm x 14.3 mm)
60 grams
Environmental
-40°C to +85°C
-40°C to +85°C
0 to 90% @ +60°C noncondensing
IEC 801-2, Level 2
±0.5% Span error @ 400 MHz, 5 Watt, 3 ft
Warm-up time required to meet specifications is approximately 10 minutes.
* Contact factory for OEM requirements.
1Includes the combined effects of repeatability, hysteresis, and nonlinearity.
2Nonlinearity is calculated using best-fit straight line method.
3Rz is the value of the RTD resistance at the lowest measurement point. Rspan is the change in resistance over the measurement span.
Specifications subject to change without notice.
7B34
Rev. 0 | Page 4 of 8
Share Link: 