HD74ALVC162836 Просмотр технического описания (PDF) - Hitachi -> Renesas Electronics

Номер в каталоге

Компоненты Описание

Список матч

HD74ALVC162836

20-bit Universal Bus Driver with 3-state Outputs

Hitachi -> Renesas Electronics 

HD74ALVC162836

20-bit Universal Bus Driver with 3-state Outputs

ADE-205-207 (Z)

Preliminary

1st. Edition

January 1998

Description

This 20-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation.

Data flow from A to Y is controlled by the output enable (OE) input. The device operates in the

transparent mode when the latch enable (LE) input is low. When LE is high, the A data is latched if the

clock (CLK) input is held at a high or low logic level. If LE is high, the A data is stored in the latch flip

flop on the low to high transition of CLK. When OE is high, the outputs are in the high impedance state.

To ensure the high impedance state during power up or power down, OE should be tied to VCC through a

pullup resistor; the minimum value of the resistor is determined by the current sinking capability of the

driver.

All outputs, which are designed to sink up to 12 mA, include 26 Ω resistors to reduce overshoot and

undershoot.

Features

• VCC = 2.3 V to 3.6 V

• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)

• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)

• High output current ±12 mA (@VCC = 3.0 V)

• All outputs have equivalent 26 Ω series resistors, so no external resistors are required.

Share Link: