ATQ209SA Просмотр технического описания (PDF) - Panasonic Corporation

Номер в каталоге

Компоненты Описание

Список матч

ATQ209SA

TQ Series Relay, Single side stable,PCB, SMD

Panasonic Corporation 

TQ

2. Specifications

Characteristics

Contact

Rating

Electrical

characteristics

Item

Arrangement

Initial contact resistance, max.

Contact material

Nominal switching capacity

Max. switching power

Max. switching voltage

Max. switching current

Min. switching capacity (Reference value)*1

Nominal operating

power

Single side stable

1 coil latching

2 coil latching

Insulation resistance (Initial)

Breakdown voltage

(Initial)

Surge breakdown

voltage (Initial)

Between open contacts

Between contact and coil

Between contact sets

Between open contacts

Between contacts and coil

Temperature rise (at 20°C 68°F)

Operate time [Set time] (at 20°C 68°F)

Mechanical

characteristics

Expected life

Release time [Reset time] (at 20°C 68°F)

Shock resistance

Vibration resistance

Mechanical

Functional

Destructive

Functional

Destructive

Electrical

Conditions

Unit weight

Conditions for operation, transport and storage*2

Max. operating speed (at rated load)

Specifications

2 Form C

Max. 75 mΩ (By voltage drop 6 V DC 1A)

AgNi type+Au clad

2 A 30 V DC, 0.5 A 125 V AC (resistive load)

60 W (DC), 62.5 VA (AC) (resistive load)

220 V DC, 125 V AC

2A

10μA 10mV DC

140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)

70 mW (1.5 to 12 V DC), 100 mW (24 V DC)

140 mW (1.5 to 12 V DC), 200 mW (24 V DC)

Min. 1,000MΩ (at 500V DC)

Measurement at same location as “Initial breakdown voltage” section.

1,000 Vrms for 1 min. (Detection current: 10 mA)

1,500 Vrms for 1 min. (Detection current: 10 mA)

1,500 Vrms for 1 min. (Detection current: 10 mA)

1,500 V (10×160μs) (FCC Part 68)

2,500 V (2×10μs) (Bellcore)

Max. 50°C

(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)

Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce

time.)

Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce

time.) (without diode)

Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.)

Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)

10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.)

10 to 55 Hz at double amplitude of 5 mm

Min. 108 (at 180 cpm)

Min. 105 (2 A 30 V DC resistive), Min. 2×105 (1 A 30 V DC resistive),

Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)

Ambient temperature:

–40°C to +85°C –40°F to +185°F, Max. –40°C to +70°C (2A) Max. –40°F to +158°F (2A);

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

20 cpm

Approx. 2 g .071 oz

Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the

actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level])

*2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.

–6–

ASCTB14E 201407-T

Share Link: