TLOH157P
Electrical And Optical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min Typ. Max Unit
Forward voltage
Reverse current
Luminous
intensity
TLOH157P
TLOH157P(TU)
Peak emission wavelength
Spectral line half width
Dominant wavelength
VF
IF = 20 mA
IR
VR = 4 V
IV
IF = 20 mA
λp
IF = 20 mA
∆λ
IF = 20 mA
λd
IF = 20 mA
―
2.1 2.5
V
―
―
50
µA
850 2800 ―
(Note)
mcd
1530 ― 7360
―
612
―
nm
―
15
―
nm
―
605
―
nm
(Note): Lamps are classified into the following ranks according to their luminous intensity.
Measurement tolerance for each limit is ±15%.
S: 1000-2000mcd, T: 1800-3600mcd, U: 3200-6400mcd
Precaution
Please be careful of the followings
· Soldering temperature: 260°C max
Soldering time: 3 s max
(Soldering portion of lead: Up to 2 mm from the body of the device)
· If the lead is formed, the lead should be formed up to 5 mm from the body of the device without forming stress to
the resin. Soldering should be performed after lead forming.
· This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure
that it will not be affected by this IR light.
2
2002-09-25