AT25HP256 Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

Список матч

AT25HP256

SPI Serial EEPROMs

Atmel Corporation 

addition, the entire family is available in 5.0V (4.5V to

5.5V), 2.7V (2.7V to 5.5V), and 1.8V (1.8V to 3.6V) ver-

sions.

The AT25HP256/512 is enabled through the Chip Select

pin (CS) and accessed via a 3-wire interface consisting of

Serial Data Input (SI), Serial Data Output (SO), and Serial

Clock (SCK). All programming cycles are completely self-

timed, and no separate ERASE cycle is required before

WRITE.

BLOCK WRITE protection is enabled by programming the

status register with top ¼, top ½ or entire array of write pro-

tection. Separate program enable and program disable

instructions are provided for additional data protection.

Hardware data protection is provided via the WP pin to pro-

tect against inadvertent write attempts to the status regis-

ter. The HOLD pin may be used to suspend any serial

communication without resetting the serial sequence.

Absolute Maximum Ratings*

Operating Temperature .................................. -55°C to +125°C

Storage Temperature ..................................... -65°C to +150°C

Voltage on Any Pin

with Respect to Ground .................................... -1.0V to +7.0V

Maximum Operating Voltage........................................... 6.25V

DC Output Current ........................................................ 5.0 mA

*NOTICE:

Stresses beyond those listed under “Absolute Maxi-

mum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional

operation of the device at these or any other condi-

tions beyond those indicated in the operational sec-

tions of this specification is not implied. Exposure to

absolute maximum rating conditions for extended

periods may affect device reliability.

Block Diagram

32,768/65,536 x 8

2

AT25HP256/512

Share Link: