fitipower integrated technology lnc.
FP6326/A
Synchronous Buck PWM
DC-DC Controller
Description
The FP6326/A is designed to drive two N-channel
MOSFETs in a synchronous rectified buck topology.
It provides the output adjustment, internal soft-start,
frequency compensation networks, monitoring and
protection functions into a single package.
The IC operating at fixed 300kHz or 600kHz
frequency provides simple, single feedback loop,
voltage mode control with fast transient response.
The resulting PWM duty ratio ranges from 0-100%.
The FP6326/A features over current protection. The
output current is monitored by sensing the voltage
drop across the RDS-ON of the low side MOSFET
which eliminates the need for a current sensing
resistor.
This device is available in SOP-8 package.
Features
● Operates from +5V or +12V
● High Output Current
● Drives Two Low Cost N-Channel MOSFETs
● Fast Transient Response
● Simple Single-Loop Control Design
( Voltage-Mode PWM Control)
● Internal Soft-Start
● Over-Current Fault Monitor
● Over-Voltage Protection
● Under-Voltage Protection
● SOP-8 Package
● RoHS Compliant
Applications
● Motherboard
● Graphic Card
● Telecomm Equipments
● High Power DC-DC Regulators
● Servers
Pin Assignment
SO Package (SOP-8)
Figure 1. Pin Assignment of FP6326/A
Ordering Information
FP6326□□□□
TR: Tape / Reel
G: Green
Package Type
SO: SOP-8
Switching Frequency
Blank: 300kHz
A: 600kHz
FP6326/A-1.1-JUL-2009
1