ADM1063ASUZ(RevC) Просмотр технического описания (PDF) - Analog Devices

Номер в каталоге

Компоненты Описание

Список матч

ADM1063ASUZ
(Rev.:RevC)

Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring

Analog Devices 

Multisupply Supervisor/Sequencer with

ADC and Temperature Monitoring

ADM1063

FEATURES

Complete supervisory and sequencing solution for up to

10 supplies

10 supply fault detectors enable supervision of supplies to

<0.5% accuracy at all voltages at 25°C

<1.0% accuracy across all voltages and temperatures

5 selectable input attenuators allow supervision of supplies to

14.4 V on VH

6 V on VP1 to VP4 (VPx)

5 dual-function inputs, VX1 to VX5 (VXx)

High impedance input to supply fault detector with

thresholds between 0.573 V and 1.375 V

General-purpose logic input

10 programmable driver outputs, PDO1 to PDO10 (PDOx)

Open-collector with external pull-up

Push/pull output, driven to VDDCAP or VPx

Open collector with weak pull-up to VDDCAP or VPx

Internally charge-pumped high drive for use with external

N-FET (PDO1 to PDO6 only)

Sequencing engine (SE) implements state machine control

of PDOx outputs

State changes conditional on input events

Enables complex control of boards

Power-up and power-down sequence control

Fault event handling

Interrupt generation on warnings

Watchdog function can be integrated in SE

Program software control of sequencing through SMBus

Complete voltage margining solution for 6 voltage rails

12-bit ADC for readback of all supervised voltages

1 internal and 2 external temperature sensors

Reference input (REFIN) has 2 input options

Driven directly from 2.048 V (±0.25%) REFOUT pin

More accurate external reference for improved

ADC performance

Device powered by the highest of VPx, VH for improved

redundancy

User EEPROM: 256 bytes

Industry-standard, 2-wire bus interface (SMBus)

Guaranteed PDO low with VH, VPx = 1.2 V

Available in 40-lead, 6 mm × 6 mm LFCSP and

48-lead, 7 mm × 7 mm TQFP packages

For more information about the ADM1063 register map,

refer to the AN-698 Application Note at www.analog.com.

FUNCTIONAL BLOCK DIAGRAM

D1P D1N D2P D2N

REFIN REFOUT REFGND SDA SCL A1 A0

TEMP

SENSOR

INTERNA L

DIODE

VREF

SMBus

INTERFACE

VX1

VX2

VX3

VX4

VX5

VP1

VP2

VP3

VP4

VH

AGND

12-BIT

SAR ADC

CLOSED-LOOP

MARGINING SYSTEM

DUAL-

FUNCTION

INPUTS

(LOGIC INPUTS

OR

SFDs)

PROGRAMMABLE

RESET

GENERATORS

(SFDs)

SEQUENCING

ENGINE

ADM1063

EEPROM

CONFIGURABLE

OUTPUT

DRIVERS

(HV CAPABLE OF

DRIVING GATES

OF N-FET)

CONFIGURABLE

OUTPUT

DRIVERS

(LV CAPABLE

OF DRIVING

LOGIC SIGNALS)

VDD

ARBITRATOR

PDO1

PDO2

PDO3

PDO4

PDO5

PDO6

PDO7

PDO8

PDO9

PDO10

PDOGND

VDDCA P

Figure 1.

VCCP GND

APPLICATIONS

Central office systems

Servers/routers

Multivoltage system line cards

DSP/FPGA supply sequencing

In-circuit testing of margined supplies

GENERAL DESCRIPTION

The ADM1063 is a configurable supervisory/sequencing device

that offers a single-chip solution for supply monitoring and

sequencing in multiple supply systems. In addition to these

functions, the ADM1063 integrates a 12-bit ADC that can be

used to accurately read back up to 12 separate voltages.

The device also provides up to 10 programmable inputs for

monitoring undervoltage faults, overvoltage faults, or out-of-

window faults on up to 10 supplies. In addition, 10 programmable

outputs can be used as logic enables. Six of these programmable

outputs can provide up to a 12 V output for driving the gate of

an N-FET that can be placed in the path of a supply.

Rev. C

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113 ©2005–2011 Analog Devices, Inc. All rights reserved.

Share Link: