HN58X2432I Просмотр технического описания (PDF) - Hitachi -> Renesas Electronics

Номер в каталоге

Компоненты Описание

Список матч

HN58X2432I

Two-wire serial interface 8k EEPROM (1-kword × 8-bit)/16k EEPROM (2-kword × 8-bit) 32k EEPROM (4-kword × 8-bit)/64k EEPROM(8-kword × 8-bit)

Hitachi -> Renesas Electronics 

HN58X2408I/HN58X2416I/HN58X2432I/HN58X2464I

Write Operations

Byte Write:

A write operation requires an 8-bit device address word with R/W = “0”. Then the EEPROM sends

acknowledgment "0" at the ninth clock cycle. After these, the 8kbit to 16kbit EEPROMs receive 8-bit

memory address word, on the other hand the 32kbit and 64kbit EEPROMs receive 2 sequence 8-bit

memory address words. Upon receipt of this memory address, the EEPROM outputs acknowledgment "0"

and receives a following 8-bit write data. After receipt of write data, the EEPROM outputs

acknowledgment "0". If the EEPROM receives a stop condition, the EEPROM enters an internally-timed

write cycle and terminates receipt of SCL, SDA inputs until completion of the write cycle. The EEPROM

returns to a standby mode after completion of the write cycle.

Byte Write Operation

8k to 16k

Start

Device

address

1010

32k to 64k

Start

Device

address

1010

Memory

address (n)

W

ACK

R/W

1st Memory

address (n)

W

ACK

R/W

Notes: 1. Don‘t care bits for 32k and 64k.

2. Don‘t care bit for 32k.

Write data (n)

ACK

ACK Stop

2nd Memory

address (n)

Write data (n)

ACK ACK

Stop

12

Share Link: