Maximum ratings
4
Maximum ratings
M41T00
Stressing the device above the rating listed in the "Absolute maximum ratings" table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality
documents.
Caution:
Table 6. Absolute maximum ratings
Symbol
Parameter
Value
Unit
TSTG
TA
VIO
TSLD(1)
VCC
IO
PD
Storage temperature (VCC off, oscillator off)
Ambient operating temperature
Input or output voltages
Lead solder temperature for 10 seconds
Supply voltage
Output current
Power dissipation
–55 to 125
°C
-40 to 85
°C
–0.3 to 7
V
260
°C
–0.3 to 7
V
20
mA
0.25
W
1. Reflow at peak temperature of 260°C (total thermal budget not to exceed 245°C for greater than 30
seconds).
Negative undershoots below -0.3 V are not allowed on any pin while in the backup mode.
18/25