PS395
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
Precision 8-Ch. 17V, SPST Switch
w/8-Bit Serial Decoded Control
Features
• Low On-Resistance (100Ω typ.)
Minimizes Distortion and Error Voltages
• Single Supply Operation (±2.7V to ±8V)
• Improved Second Source for MAX395
• SPI/QSI, Microwire-Compatible Serial Interface
• Split-Supply Operation (+3V to +8V)
• On-Resistance Flatness: 10Ω Max.
• On-Resistance Matching Between Channels: 5Ω Max.
• TTL/CMOS Logic Compatible (w/+5V or ±5V supplies)
• Fast Switching Speed
• Break-Before-Make action eliminates momentary crosstalk
• Rail-to-Rail Analog Signal Range
• Low Power Consumption
• Narrow SOIC and QSOP Packages Minimize Board Area
• Asynchonous Reset (RS) Input
Applications
• Data Acquisition Systems
• Audio Switching and Routing
• Test Equipment
• PBX, PABX
• Telecommunication Systems
• Battery-Powered Systems
Pin Configurations
CLK 1
V+ 2
DATAIN 3
GND 4
NO0 5
COM0 6
NO1 7
COM1 8
NO2 9
COM2 10
NO3 11
COM3 12
Top View
PS395
24 EN
8-Bit
Decoding
Logic
23 RS
22 DATAOUT
21 V–
DIP/SO
20 NO7
19 COM7
18 NO6
17 COM6
16 NO5
15 COM5
14 NO4
13 COM4
Description
The PS395 eight-channel, serially controlled, single-pole/single-
throw (SPST) analog switch offers eight separately controlled
switches that conduct equally well in either direction. ON-resis-
tance (100Ω max.) is matched between switches to 5Ω max. and is
flat (10Ω max.) over the specified signal range.
These CMOS devices can operate continuously with dual power
supplies ranging from ±2.7V to ±8V or a single supply between
+2.7V and +16V. Each switch can handle rail-to-rail analog signals.
The off leakage current is only 0.1nA at +25°C or 5nA at +85°C.
Upon power-up, all switches are off, and the internal shift registers
are reset to zero. The PS395 is electrically equivalent to two PS391
quad switches controlled by a serial interface, and is pin compat-
ible with the PS335.
The serial interface is compatible with SPI/QSPI and
Microwire. Functioning as a shift register, it allows data (at DIN)
to be clocked-in synchronously with the rising edge of clock
(SCLK). The shift registers output (DOUT) enables several PS395s
to be daisy chained.
All digital inputs have 0.8V to 2.4V logic thresholds, ensuring both
TTL- and CMOS-logic compatibility when using ±5V supplies or a
single +5V supply.
Pin Description
Name
Function
CLK
Serial Clock Digital Input
V+
Positive Analog Supply Voltage Input
DATAIN
GND
Serial Data Digital Input
Ground
NO0NO7
COM0COM7
V
Normally Open Analog Switches 07
Common Analog Switches 07
Negative Analog Supply Voltage Input
DATAOUT
RS
Serial Data Digital Output
Reset Input (RESET)
CS
Chip-Select Digital Input
Note:
NO and COM pins are identical and interchangeble. Either may
be considered as an input or an output; signals pass equally
well in either direction.
SPI & QSPI are trademarks of Motorola, Inc. Microwire is a trademark
of National Semiconductor Corporation
1
PS8462 02/22/00