datasheetbank_Logo   Технический паспорт Поисковая и бесплатно техническое описание Скачать
Номер детали
Главная  >>>  TI  >>> TLC59116 PDF

TLC59116 Даташит - Texas Instruments

Номер в каталогеОписание (Функция)производитель
TLC59116 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver TI
Texas Instruments TI
Другие PDF  недоступен.
TLC59116 Datasheet PDF :   TLC59116 pdf   
TLC59116 image

Description
The TLC59116 is an I2C bus controlled 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) color mixing and backlight application. Each LED output has its own 8-bit resolution (256 steps) fixed-frequency individual PWM controller that operates at 97 kHz, with a duty cycle that is adjustable from 0% to 99.6%.

Features
• 16 LED Drivers (Each Output Programmable at Off, On, Programmable LED Brightness, or Programmable Group Dimming and Blinking Mixed With Individual LED Brightness)
• 16 Constant-Current Output Channels
• 256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully Off (Default) to Maximum Brightness Using a 97-kHz PWM Signal
• 256-Step Group Brightness Control Allows General Dimming [Using a 190-Hz PWM Signal From Fully Off to Maximum Brightness (Default)]
• 256-Step Group Blinking With Frequency Programmable From 24 Hz to 10.73 s and Duty Cycle From 0% to 99.6%
• Four Hardware Address Pins Allow 14 TLC59116 Devices to Be Connected to Same I2C Bus
• Four Software-Programmable I2C Bus Addresses (One LED Group Call Address and Three LED Sub Call Addresses) Allow Groups of Devices to Be Addressed at Same Time in Any Combination
• Software Reset Feature (SWRST Call) Allows Device to Be Reset Through I2C Bus
• Up to 14 Possible Hardware-Adjustable Individual I2C Bus Addresses Per Device, So That Each Device Can Be Programmed
• Open-Load and Overtemperature Detection Mode to Detect Individual LED Errors
• Output State Change Programmable on Acknowledge or Stop Command to Update Outputs Byte-by-Byte or All at Same Time (Default to Change on Stop)
• Output Current Adjusted Through an External Resistor
• Constant Output Current Range: 5 mA to 120 mA
• Maximum Output Voltage: 17 V
• 25-MHz Internal Oscillator Requires No External Components
• 1-MHz Fast-mode Plus (FMT) Compatible I2C Bus Interface With 30-mA High-Drive Capability on SDA Output for Driving High-Capacitive Buses
• Internal Power-On Reset
• Noise Filter on SCL and SDA Inputs
• No Glitch on Power-Up
• Active-Low Reset
• Supports Hot Insertion
• Low Standby Current
• 3.3-V or 5-V Supply Voltage
• 5.5-V Tolerant Inputs
• Offered in 28-Pin Thin Shrink Small-Outline
   Package (TSSOP) (PW) and 32-Pin Quad
   Flatpack No Lead (QFN)
• –40 °C to 85 °C Operation

Applications
• Gaming
• Small Signage
• Industrial Equipment

 

Ссылка на страницу (HTML): 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42 
 

В связи с паспорте перечисляет TLC59116

Номер в каталогеОписание (Функция)PDFпроизводитель
MBI5024 16-bit Constant Current LED Sink Driver MBI5024 View Unspecified
MBI5016 16-bit Constant Current LED Sink Driver MBI5016 View Unspecified
MBI5026 16-bit Constant Current LED Sink Driver MBI5026 View Unspecified
MBI5027 16-bit Constant Current LED Sink Driver with Error Detection MBI5027 View Unspecified
MBI5016CF 16-bit Constant Current LED Sink Driver MBI5016CF View Unspecified
STP04CM596 4-Bit constant current for power-LED LED sink driver STP04CM596 View STMicroelectronics
STP08C596 8-BIT CONSTANT CURRENT LED SINK DRIVER STP08C596 View STMicroelectronics
STP04CM05 4-bit constant current power-LED sink driver STP04CM05 View STMicroelectronics
STP08CL596B1 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER STP08CL596B1 View STMicroelectronics
MBI5040 16-Channel Constant Current LED Driver With 16-bit PWM Control and Dot-Correction MBI5040 View Unspecified

Share Link : 

English 한국어 简体中文 日本語 español


All Rights Reserved © datasheetbank.com 2014 - 2019  [ Политика конфиденциальности ] [ Запрос Даташит ]