datasheetbank_Logo
Технический паспорт Поисковая и бесплатно техническое описание Скачать

P/N + Описание + Поиск контента

Ключевые слова :
Номер в каталоге(s) : LTS-367G
LiteOn
LiteOn Technology
Компоненты Описание : 0.36 INCH DIGIT HEIGHT SINGLE DIGIT SEVEN SEGMENT DISPLAY

0.36 INCH DIGIT HEIGHT SINGLE DIGIT SEVEN SEGMENT DISPLAY

Компоненты Описание : 3" DUAL DIGIT DISPLAY

3" DUAL DIGIT DISPLAY

Номер в каталоге(s) : NTE2054
NTE-Electronic
NTE Electronics
Компоненты Описание : Integrated Circuit A/D Converter for 3–DIGIT DISPLAY

Description:
The NTE2054 is an I2L monolithic Analog to DIGITal converter in a 16–Lead DIP type package that provides a 3–DIGIT multiplexed BCD output. This device, when used with an NTE2032 BCD–to–Seven–Segment Decoder/Driver and a minimum of external parts, implements a complete 3–DIGIT DISPLAY.

Features:
DUAL–Slope A/D Conversion
• Multiplexed BCD DISPLAY
• Ultra–Stable Internal Band–Gap Voltage Reference
• Capable of Reading 99mV below GND with a Single Supply
• Differential Input
• Internal Timing – No External Clock Required
• Choice of Low–Speed (4Hz) or High–Speed (96Hz) Conversion Rate
• “Hold” Inhibits Conversion but Maintains Delay

Номер в каталоге(s) : 74C911 MM74C911 MM74C991N
Fairchild
Fairchild Semiconductor
Компоненты Описание : 4-DIGIT Expandable Segment DISPLAY Controller

General Description
The MM74C911 DISPLAY controller is an interface element with memory that drives a 4-DIGIT, 8-segment LED DISPLAY. The MM74C911 allows indiviDUAL control of any segment in the 4-DIGIT DISPLAY. The number of segments per DIGIT can be expanded without any external components. For example, two MM74C911’s can be cascaded to drive a 16-segment alpha-numeric DISPLAY

Features
■ Direct segment drive (100 mA typ.) 3-STATE
■ 4 registers addressed like RAM
■ Internal oscillator and scanning circuit
■ Direct base drive to DIGIT transistor
■ Segment expandability without external components
■ TTL compatible inputs
■ Power saver mode—5 µW (typ.)

 

Номер в каталоге(s) : CA3162 CA3162A CA3162AE CA3162E
Intersil
Intersil
Компоненты Описание : A/D Converters for 3-DIGIT DISPLAY

Description
The CA3162E and CA3162AE are I2L monolithic A/D converters that provide a 3 DIGIT multiplexed BCD output. They are used with the CA3161E BCD-to-Seven-Segment Decoder/Driver and a minimum of external parts to implement a complete 3-DIGIT DISPLAY. The CA3162AE is identical
to the CA3162E except for an extended operating temperature range.

Features
DUAL Slope A/D Conversion
• Multiplexed BCD DISPLAY
• Ultra Stable Internal Band Gap Voltage Reference
• Capable of Reading 99mV Below Ground with Single Supply
• Differential Input
• Internal Timing - No External Clock Required
• Choice of Low Speed (4Hz) or High Speed (96Hz) Conversion Rate
• “Hold” Inhibits Conversion but Maintains Delay
• Overrange Indication
- “EEE” for Reading Greater than +999mV, “-” for Reading More Negative than -99mV When Used With CA3161E
• Extended Temperature Range Version Available

Номер в каталоге(s) : BS-A34DRD
BRIGHT
BRIGHT LED ELECTRONICS CORP
Компоненты Описание : LED DIGIT DISPLAY SPECIFICATION

LED DIGIT DISPLAY SPECIFICATION

commodity : 0.39"(10.0mm) SINGLE DIGIT DISPLAY

Intersil
Intersil
Компоненты Описание : 3 1/2 DIGIT, LCD/LED DISPLAY, A/D Converter with DISPLAY Hold

Description
The Intersil ICL7116 and ICL7117 are high performance, low power, 31/2 DIGIT, A/D converters. Included are seven segment decoders, DISPLAY drivers, a reference, and a clock. The ICL7116 is designed to interface with a liquid crystal DISPLAY (LCD) and includes a multiplexed backplane drive. The ICL7117 will directly drive an instrument size, light emitting diode (LED) DISPLAY.

Features
• HOLD Reading Input Allows Indefinite DISPLAY Hold
• Guaranteed Zero Reading for 0V Input
• True Polarity at Zero for Precise Null Detection
• 1pA Typical Input Current
• Direct DISPLAY Drive
   - LCD ICL7116
   - LED lCL7117
• Low Noise - Less Than 15µVP-P (Typ)
• On Chip Clock and Reference
• Low Power Dissipation - Typically Less Than 10mW
• No Additional Active Circuits Required
• Surface Mount Package Available

Номер в каталоге(s) : MM74C912N MM74C912
Fairchild
Fairchild Semiconductor
Компоненты Описание : 6-DIGIT BCD DISPLAY Controller/Driver

General Description
The MM74C912 DISPLAY controllers are interface elements, with memory, that drive a 6-DIGIT, 8-segment LED DISPLAY.
The DISPLAY controllers receive data information through 5 data inputs A, B, C, D and DP, and DIGIT information through 3 address inputs K1, K2 and K3.

Features
■ Direct segment drive (100 mA typ.) 3-STATE
■ 6 registers addressed like RAM
■ Internal oscillator and scanning circuit
■ Direct base drive to DIGIT transistor (20 mA typ.)
■ Internal segment decoder
■ TTL compatible inputs

Номер в каталоге(s) : CA3162 CA3162AE CA3162E
Harris
Harris Semiconductor
Компоненты Описание : A/D Converter for 3-DIGIT DISPLAY

Description
The CA3162E and CA3162AE are I2L monolithic A/D converters that provide a 3 DIGIT multiplexed BCD output. They are used with the CA3161E BCD-to-Seven-Segment Decoder/Driver* and a minimum of external parts to implement a complete 3 DIGIT DISPLAY. The CA3162AE is identical to the CA3162E except for an extended operating temperature range.

Features
DUAL Slope A/D Conversion
• Multiplexed BCD DISPLAY
• Ultra Stable Internal Band Gap Voltage Reference
• Capable of Reading 99mV Below Ground with Single Supply
• Differential Input
• Internal Timing - No External Clock Required
• Choice of Low Speed (4Hz) or High Speed (96Hz) Conversion Rate
• “Hold” Inhibits Conversion but Maintains Delay
• Overrange Indication
   - “EEE” for Reading Greater than +999mV, “-” for Reading More Negative than -99mV When Used With CA3161E
• BCD-to-Seven-Segment Decoder/Driver
• Extended Temperature Range Version Available

 

Номер в каталоге(s) : TC818ACBU TC818A
Microchip
Microchip Technology
Компоненты Описание : Auto-Ranging Analog-to-DIGITal Converter with 3-1/2 DIGIT DISPLAY

General Description
The TC818A is an integrating analog-to-DIGITal converter (ADC) with a 3-1/2 DIGIT numeric LCD driver, automatic ranging, and single 9V battery operation. The numeric DISPLAY provides 0.05% resolution and a full set of annunciators that spell out the TC818As many operating modes.

Features
• Auto-Ranging Analog-to-DIGITal Converter with 3-1/2 DIGIT DISPLAY
• Annunciator Outputs Permit Customizing of LCD
• Auto-Range Operation for AC and DC Voltage and Resistance Measurements
• Two User Selected AC/DC
• Current Ranges: 20mA and 200mA
• 22 Operating Ranges: 9 DC/AC Voltage
• 4 AC/DC Current
• 9 Resistance and Low Power Ohms
DISPLAY Hold Function
• 3-1/2 DIGIT Resolution in Auto-Range Mode: 1/2000
• Extended Resolution in Manual Range Mode: 1/3000
• Internal AC-to-DC Conversion Op Amp
• Triplex LCD Drive for Decimal Points, DIGITs,
• Bar Graphs, and Annunciators
• Continuity Detection and Piezoelectric Transducer Driver
• Low Drift Internal Reference: 75ppm/°C
• 9V Battery Operation: 10mW
• Low Battery Detection and LCD Annunciator

12345678910 Next

All Rights Reserved© datasheetbank.com [ 個人情報 保護方針 ] [ リクエストデータシート ]